密度標記珠是已知質量密度的小色微球,用于校準密度梯度并確定梯度色譜柱的密度。密度梯度通常用于細胞,病毒和亞細胞顆粒的分離和純化。通常使用覆蓋一定密度范圍的一組密度標記珠。
梯度是用在柱內不同高度漂浮的珠進行校準的。當一個測試樣品被添加到色譜柱中時,它會下降到中性浮力點,密度由校準圖確定。密度梯度柱可用于測量任何樣品的密度。
化合物密度標記珠在2.5ml小瓶中以20%濃度提供在水溶液中。我們的密度珠粒尺寸在200-300um之間。與已停產的GE醫療保健套件不同,Cospheric的彩色微球已準備就緒,可直接使用。
運輸:DMB產品不需要特殊運輸。
儲存:由于沒有添加防腐劑,我們建議在批次編號為[YYMMDD-XXX]的6個月內使用非冷藏產品。該產品可以冷藏或冷凍以延長溶液保質期。密度珠是惰性的,不會降解。但是,該解決方案可能降解導致結塊和懸浮不良,從而導致更寬的頻帶。如果溶液降解,可以將珠子沖洗干凈,然后使用我們的Tween懸浮方案重新懸浮。
Density marker beads are small colored microspheres of known mass density that are used for calibrating density gradients and determining density in gradient columns. Density gradients are often used for separations and purification of cells, viruses and sub-cellular particles. Generally a set of several density marker beads covering a range of densities is used.
The gradient is calibrated with beads that float at different heights within the column. When a test sample is added to the column it drops until the point of neutral buoyancy and the density is determined from the calibration chart. Density gradient columns can be used to measure the density of any sample.
Cospheric Density Marker Beads are provided at a 20% concentration in an aqueous solution in 2.5ml vials. Our Density Beads are in the 200-300um size range. Unlike GE Healthcare kits that have been discontinued, the Cospheric's colored microspheres are ready for use right out of the vial.
Shipping: DMB product does not require special shipping.
Storage: As no preservatives are added, we recommend unrefrigerated product to be used within 6 months of date coded lot# [YYMMDD-XXX]. The product can be refrigerated or frozen to extend the solutions shelf life. The density beads are inert, and do not degrade. However, the solution can degrade causing agglomeration and poor suspension, leading to wider bands. If the solution degrades, the beads can be flushed clean, and then re-suspended using our Tween Suspension Protocol.
Item # Description/Size
DMB-kit Density Marker Beads Kit of 6 Vials (1.02, 1.04, 1.06, 1.08, 1.09, 1.13g/cc)
DMB-FGRN-1.02 2.5ml Density Marker Beads for Density Gradients, Fluorescent Green Microspheres, 1.02g/cc, 20% concentration in Aqueous Solution
DMB-FORG-1.04 2.5ml Density Marker Beads for Density Gradients, Fluorescent Orange Microspheres, 1.04g/cc, 20% concentration in Aqueous Solution
DMB-FVIO-1.06 2.5ml Density Marker Beads for Density Gradients, Fluorescent Violet Microspheres, 1.06g/cc, 20% concentration in Aqueous Solution
DMB-RBLU-1.08 2.5ml Density Marker Beads for Density Gradients, Dark Blue Microspheres, 1.08g/cc, 20% concentration in Aqueous Solution
DMB-FRED-1.09 2.5ml Density Marker Beads for Density Gradients, Fluorescent Red Microspheres, 1.09g/cc, 20% concentration in Aqueous Solution
DMB-FBLU-1.13 2.5ml Density Marker Beads for Density Gradients, Fluorescent Blue Microspheres, 1.13g/cc, 20% concentration in Aqueous Solution
|
|
|
購買咨詢
(已有0條咨詢)商品評論
(已有0條評論)購買流程
1.購買產品:點擊“立即購買”→填寫產品數量、聯系方式并提交→會員顧問訂單處理→合同簽訂。
2.咨詢產品:請聯系會員顧問或致電會員客服電話。
3.如果您還不是我們的會員,請先注冊。
4.最小起訂數量:1 ,進口產品貨期,請跟產品擔當聯系!
品牌擔當:
投訴電話:17717909117
聯系方式: 電話:021-52069907 分機 或撥0轉總機,傳真:010-52060857
維修流程
- 1、技術溝通,初步判斷問題電話,與客戶進行初步溝通、了解并初步判斷儀器所出現的故障問題。
- 2、簽訂維修協議由我公司向客戶發送儀器維修協議,客戶需如實填寫內容并回傳以便我司對儀器做進一步判斷。
- 3、客戶郵寄儀器客戶可按照我司地址郵寄儀器,并將快遞單拍照發送至您的專屬客服進行備案。
- 4、詳細診斷機器故障我司收到郵寄儀器后會對郵寄的儀器進行拍照并開箱檢驗,對儀器做進一步故障判斷。
- 5、支付維修費用如客戶儀器在保修期內,我司不收取任何維修費,如客戶儀器在保修期外,我司會適當收取維修費。
- 6、郵寄儀器給客戶我司將維修好的儀器按客戶地址進行拍照并郵寄,自此雖維修協議終止,但我司將提供終身免費答疑及技術指導。
Testo 340 煙氣分析儀 | Testo350 煙氣分析儀 | PMS塵埃粒子計數器 | TSI塵埃粒子計數器 | Lighthouse塵埃粒子計數器 | Metone塵埃粒子計數器 |
HACH塵埃粒子計數器 | TSI氣溶膠發生器 | ATI氣溶膠發生器 | Palas氣溶膠發生器 | Topas氣溶膠發生器 | Palas靜電中和器 |
Topas靜電中和器 | Grimm粒徑譜儀 | TSI粒徑譜儀 | Topas粒徑譜儀 | Palas粒徑譜儀 | TSI掃描電遷移率粒徑譜儀 |
HTV 甲醛檢測儀 | HTV-M甲醛檢測儀 | TVOC 檢測儀維修 | Grimm掃描電遷移率粒徑譜儀 | Palas掃描電遷移率粒徑譜儀 | Brechtel掃描電遷移率粒徑譜儀 |
TSI 8530粉塵儀 | TSI 8532粉塵儀 | TSI 8533粉塵儀 | Rad7 氡檢測儀 | TSI 8534粉塵儀 | Thermo PDR-1500粉塵儀 |
ATI 2i光度計 | ATI氣溶膠稀釋器 | 風量罩 | 風速儀 | 空氣品質檢測儀 | EN779測試臺改造 |
Dustmate 粉塵儀 | TSI 8108大顆粒氣溶膠發生器 | TSI 3450單分散氣溶膠發生器 | 車身氣密性檢測設備 | 風管漏風量測試設備 | 凝聚核粒子計數器校準裝置 |
粒子計數器校準裝置 | 更多型號請咨詢客服19mro@19mro.com |
相關商品