 |
Aerosol Generator ATM 225
The aerosol generator ATM 225 is used for generating test aerosols with defined properties. The number concentration of the aerosol particles can be set. From the determined concentration distributions of the produced DEHS aerosol it becomes evident that in the range of expected MPPS (Most Penetration Particle 0.2-0.3 μm) a very high particle concentration is provided (> 107 particles/cm3). In the measuring range of many optical particle counters (> 0.3-0.5 μm) a particle number (0.5 x 106 l particles/cm3) is generated in line with the requirements. The design and technological features of the device ensure a high stability of particle size distribution and particle concentration. The generated aerosol is thus very well reproducible.
The dimensions as well as low weight are ideal for mobile and flexible use. The core of the ATM 225 is an innovative atomizer completely made of stainless steel. It is a dual fabric nozzle working according to the injector principle, which is connected to an impact trap. It ensures that large droplets generated during the atomizing process are immediately returned and basically defines the generated particle size distribution. The compressed air required for atomizing is generated by a noiseless piston compressor. Before entering the atomizer the generated compressed air is cleaned by a HEPA filter. The standard volume flow is set at 250 l/h.
Markus Klotz GmbH
Areas of application:
An essential area of application of the aerosol generator ATM 225 is the testing of high efficiency filters or the acceptance and control measurements of c, laminar flow boxes and safety workbenches.
Technical Details:
Method: atomizer
Volume flow: 250 l/h
Particle materials: DEHS, DOP, paraffin
Emery 3004
Latex suspensions
Specification / DEHS
> 108 particles/cm3
0.2 μm / 2 x 10/7 Part./cm3
0.5 μm / 5 x 10/5 Part./cm3
1 μm / 1 x 10/5 Part./cm3
modal value 0.25 μm
sample flow 2.5 g/h
Operating time: 80 ml fill: approx. 25 h
Power supply: 12 V/DC power supply
Dimensions (h x w x d): 220 x 300 x 180 mm
Weight / material: 4.5 kg aluminum
| 
| ||||||||||||||
購買咨詢
（已有0條咨詢）商品評論
（已有0條評論）購買流程
1.購買產品：點擊“立即購買”→填寫產品數量、聯系方式并提交→會員顧問訂單處理→合同簽訂。
2.咨詢產品：請聯系會員顧問或致電會員客服電話。
3.如果您還不是我們的會員，請先注冊。
4.最小起訂數量：1 ，進口產品貨期，請跟產品擔當聯系！
品牌擔當：
投訴電話：17717909117
聯系方式: 電話：021-52069907 分機 或撥0轉總機,傳真：010-52060857
維修流程
- 1、技術溝通，初步判斷問題電話,與客戶進行初步溝通、了解并初步判斷儀器所出現的故障問題。
- 2、簽訂維修協議由我公司向客戶發送儀器維修協議，客戶需如實填寫內容并回傳以便我司對儀器做進一步判斷。
- 3、客戶郵寄儀器客戶可按照我司地址郵寄儀器，并將快遞單拍照發送至您的專屬客服進行備案。
- 4、詳細診斷機器故障我司收到郵寄儀器后會對郵寄的儀器進行拍照并開箱檢驗，對儀器做進一步故障判斷。
- 5、支付維修費用如客戶儀器在保修期內，我司不收取任何維修費，如客戶儀器在保修期外，我司會適當收取維修費。
- 6、郵寄儀器給客戶我司將維修好的儀器按客戶地址進行拍照并郵寄，自此雖維修協議終止，但我司將提供終身免費答疑及技術指導。
| Testo 340 煙氣分析儀 | Testo350 煙氣分析儀 | PMS塵埃粒子計數器 | TSI塵埃粒子計數器 | Lighthouse塵埃粒子計數器 | Metone塵埃粒子計數器 |
| HACH塵埃粒子計數器 | TSI氣溶膠發生器 | ATI氣溶膠發生器 | Palas氣溶膠發生器 | Topas氣溶膠發生器 | Palas靜電中和器 |
| Topas靜電中和器 | Grimm粒徑譜儀 | TSI粒徑譜儀 | Topas粒徑譜儀 | Palas粒徑譜儀 | TSI掃描電遷移率粒徑譜儀 |
| HTV 甲醛檢測儀 | HTV-M甲醛檢測儀 | TVOC 檢測儀維修 | Grimm掃描電遷移率粒徑譜儀 | Palas掃描電遷移率粒徑譜儀 | Brechtel掃描電遷移率粒徑譜儀 |
| TSI 8530粉塵儀 | TSI 8532粉塵儀 | TSI 8533粉塵儀 | Rad7 氡檢測儀 | TSI 8534粉塵儀 | Thermo PDR-1500粉塵儀 |
| ATI 2i光度計 | ATI氣溶膠稀釋器 | 風量罩 | 風速儀 | 空氣品質檢測儀 | EN779測試臺改造 |
| Dustmate 粉塵儀 | TSI 8108大顆粒氣溶膠發生器 | TSI 3450單分散氣溶膠發生器 | 車身氣密性檢測設備 | 風管漏風量測試設備 | 凝聚核粒子計數器校準裝置 |
| 粒子計數器校準裝置 | 更多型號請咨詢客服19mro@19mro.com |
技術文檔下載
- 2018-07-07 20:47Klotz atm-225氣溶膠發生器原版資料
相關商品