URG-2000-22FB濾膜夾托

URG濾膜托夾設計用于固定37毫米過濾介質，其設計可確保樣品的完整性，并可方便地往返實驗室。不銹鋼支撐屏幕采用Teflon?涂層，以防止屏幕和過濾介質之間發生反應。新型O形圈可防止O形圈與過濾介質接觸，從而形成防漏密封。

設計用于容納37毫米過濾介質

＃30入口處的外螺紋允許直接連接環形剝離器，歧管，旋風器和其他URG組件

1/4英寸（5.7厘米）最大外徑

URG-2000-22FB：

3 1/2“（8.9 cm）高度（2層濾膜）

0.44磅（0.2千克）

不銹鋼支撐屏幕是Teflon?涂層，以防止屏幕和過濾介質之間的反應

設計確保樣品完整性，并允許輕松運輸?shù)綄?shí)驗室

快速安裝在出口處，便于連接真空泵（URG-2000-22F，如圖所示）

＃30外螺紋用于連接URG組件，如PUF采樣器（URG-2000-22FB，如圖所示）

使用新型O形圈布置防止O形圈和過濾介質接觸并形成防漏密封

可提供1或2個層濾膜

URG-2000-22FB: #30 Male Thread at Inlet and #30 Female Thread at Outlet

The URG filter holder designed to hold 37mm filter media features a design that ensures sample integrity and allows for easy transportation to and from the lab. The stainless steel support screen is Teflon? coated to prevent reactions between the screen and the filter media. Novel O-rings prevent contact between the o-ring and the filter media to create a leak-proof seal.

Designed to Contain 37mm Filter Media

#30 Male Thread at Inlet to Allow Direct Connection to Annular Denuders, Manifolds, Cyclones and Other URG Components

1/4" (5.7 cm) Largest Outer Diameter

URG-2000-22FB:

3 1/2" (8.9 cm) Height (2-Stage)

0.44 lb (0.2 kg)

Stainless Steel Support Screen is Teflon? Coated to Prevent Reactions Between Screen and Filter Media

Design Ensures Sample Integrity and Allows for Easy Transportation to and from Lab

Quick Release Fitting at Outlet for Easy Attachment to Vacuum Pump (URG-2000-22F, shown)

#30 Female Thread at Outlet to Attach URG Components such as PUF Sampler (URG-2000-22FB, shown)

Uses Novel O-Ring Arrangement to Prevent Contact Between O-Ring and Filter Media and Create a Leak-Proof Seal

Available with 1 or 2 Stages