單開口端的聚丙烯盒

單開口端的聚丙烯盒

    Single open end (SOE) systems have a maximum differential pressure of 60 psi. They are autoclavable at 250°F (121°C) and in-line sterilizable (except where noted) at 261°F (127°C). SOE cartridges have a 222 O-ring configuration to create a tight seal to prevent seepage. Use sump extension adapter kit (sold below) to fit cartridges into housings.Serial-layer magna nylon cartridges have two pleated nylon membranes—top acts as a prefilter. High retention capacity and high yields. 
    Glass fiber cartridges contain interwoven borosilicate glass microfibers held by acrylic binders for exceptional retention. Use as a prefilter to protect membrane filter systems. Not in-line sterilizable. 
   Polypropylene (PP) cartridges have a single-layer filter media. Chemically inert with high dirt-loading capacity. Use as a prefilter for aqueous solutions. Hydrophobic; prewet* before use. Not in-line sterilizable. 
    PTFE membrane cartridges have a single layer, pleated PTFE membranes laminated to a PP support. Use for gas filtration and venting. Hydrophobic and inert; prewet* when filtering aqueous solutions. 
    Semiconductor cartridges have a single-layer PES membrane. Each is flushed with 18 M? water to assure downstream cleanliness and rapid resistivity recovery. Diffusion rate of 12 mL/min at 30 psi.

   單一的開放端部（SOE）系統有一個最大的差壓力為60psi。可高溫高壓滅菌，在250°F（121°C）和在線滅菌的（特別注明除外）在261°F（127°C）。國有企業的墨盒有222 O型圈配置，以創建一個嚴密的密封，防止滲水。使用油底殼擴展適配器套件（另售），以適應麥格納尼龍到housings.Serial層墨盒的墨盒有兩個褶尼龍膜頂  

   作為預過濾器。高保留能力和高產量。 
   玻璃纖維盒含有硼硅玻璃微纖維交織丙烯酸粘合劑，特殊的保留。使用保護膜過濾系統預過濾器。不在行消毒。 
  聚丙烯（PP）的墨盒中有一個單一的層的過濾介質。化學惰性，高污負荷能力。使用作為一個預過濾器的水溶液。疏水性; *使用前預濕。不在行消毒。 
PTFE膜濾芯具有單層，打褶的PTFE膜層疊的PP的支持。用于氣體過濾和通風。疏水性和惰性;預濕*過濾水溶液時， 
   有一個單層的PES膜半導體墨盒。每沖洗的18 M？水，以保證下游的清潔和快速電阻率恢復。在30psi 12 mL / min的擴散率。