Filter Cartridges10微米單開口端的聚丙烯盒

10微米單開口端的聚丙烯盒

集合，以適應寬范圍的關鍵應用

    在許多受管制的過程中使用絕對

   會見了廣泛的行業和政府標準

   這些國有企業的墨盒有222 O型圈配置，以創建一個密封和防止進水旁路。它們是耐高壓加熱至250°F

（121℃）和在線滅菌的F至257°F（125°C），最多30分鐘周期;耐10小時的累積曝光。過濾器也可以與兼容的

化學藥劑進行消毒。所有墨盒適用于180°F（82°C）在10 PSID。使用SOE盒式油底殼轉接器套件（另售），以

確保墨盒的墨盒外殼內。符合美國CFR標題21反復接觸食品的準則，符合美國藥典USP Class VI-121°C塑料指

引，并通過MEM洗脫細胞毒性試驗。水提取物中含有小于0.25 EU / mL和通常表現出低含量的非揮發性殘留物，

聚丙烯（PP）墨盒熱粘合的高純度的PP纖維。經濟污垢承載能力高化學惰性介質。也適用于空氣/氣體過濾。所

有材料FDAacceptable。預濕的液體過濾前的疏水性（要使用的水溶液中，用甲醇預濕，然后在使用前用水沖洗）。

    A collection to fit a wide range of critical applications

    Absolute-rated for use in many regulated processes

    Meets a wide range of industry and government standards

    These SOE cartridges have a 222 O-ring configuration to create a tight seal and prevent influent bypass. They are autoclavable to 250°F (121°C) and in-line sterilizable to 257°F (125°C) for up to 30-minute cycles; tolerant to an accumulated exposure of 10 hours. The filters may also be sanitized with compatible chemical agents. All cartridges are suitable to 180°F (82°C) at 10 psid. Use a SOE cartridge-sump adapter kit (sold separately) to secure cartridges within housings.

   The cartridges comply with US CFR Title 21 guidelines for repeated food contact, comply with USP Class VI-121°C Plastics guidelines and pass the MEM Elution Cytotoxicity Test. Aqueous extracts contain less than 0.25 EU/mL and typically exhibit low levels of non-volatile residues.
   Polypropylene (PP) Cartridges Thermally bonded high-purity PP fiber. Economical for a chemically inert media with high dirt-loading capacity. Also suitable for air/gas filtration. All materials FDAacceptable. Hydrophobic—prewet before liquid filtration (To use with aqueous solutions, prewet with methanol, then rinse with water before use).