Stainless Steel Filter Housing過濾器外殼; 50 GPM（189 LPM）

過濾器外殼; 50 GPM（189 LPM）

組合濾芯過濾和離心分離機延長硒鼓的使用壽命，降低了維護

   切向進入升流式設計，防止空氣滯留

   工藝流程率高達150 GPM（568 LPM）

   電解拋光304不銹鋼外殼與安全封閉NSF 61上市

   這些外殼的獨特設計，集成了兩個過濾技術于一體。流體進入切向進氣口進入外室的離心分離發生較重的固體。

然后，流體被引導到內室的過濾通過墨盒。的初始分離固體延伸碳粉盒壽命和使用降低整體成本。優良的耐腐蝕性

能，304不銹鋼外殼電解。頂部封閉蝶形螺母固定，這樣，無需任何工具進行維修。2“不擴散核武器條約”的入口

和出口接頭包括1/4“NPT（F）壓力表安裝耦合器。的漏接頭可以手動或自動清除刪除分離的固體外室。

住房接受一個單一的，易于安裝的高容量墨盒，所有尺寸。不同于傳統的墨盒，使用這些功能深，角度褶，褶區，

更高效的固體去除，有效地集中流入。三種類型的墨盒。百褶聚酯墨盒是通用墨盒提供長壽命和高納污能力。聚酯

墨盒可清潔和可重復使用的，在大多數應用中，，NSF 61上市。抗菌墨盒褶聚酯銀沸石纖維交織。纖維交織確保持久的保護對藻

類，產生氣味的細菌，霉菌，和生物膜墨盒表面上，否則可能會增長。的百褶聚丙烯墨盒是100％聚丙烯和提供

高流速和低壓降。非常適于應用要求絕對額定褶的過濾。硒鼓組件熱粘合強度高。購買墨盒分開。

    Combination cartridge filter and centrifugal separator extends cartridge life and reduces maintenance

    Up-flow design with tangential entry prevents air entrapment

    Process flow rates up to 150 GPM (568 LPM)

    Electropolished 304 stainless steel housing with secure closure is NSF 61 listed

   The unique design of these housings incorporates two filtration technologies in one. Fluid enters a tangential inlet into an outer chamber where centrifugal separation of heavier solids takes place. The fluid is then directed into the inner chamber for filtration through the cartridge. The initial separation of solids extends cartridge life and lowers the overall cost of use. Housings are electropolished 304 stainless steel for excellent resistance to corrosion. Top closure is secured with wing nuts so that no tools are required for maintenance. The 2" NPT inlet and outlet fittings include 1/4" NPT(F) couplers for pressure gauge installation. A drain fitting allows for either manual or automatic purge of the outer chamber to remove separated solids.
  All sizes of housing accept a single, high-capacity cartridge that is easy to install. Unlike conventional cartridges, these feature deep, angled pleats that effectively concentrate flow into the pleated area for more efficient solids removal. Three types of cartridges are available.
   Pleated Polyester Cartridges are general purpose cartridges offering long life and high dirt holding capacity. Polyester cartridges are cleanable and reusable in most applications and are NSF 61 listed.
   Antimicrobial Cartridges are pleated polyester with interwoven silver zeolite fibers. The interwoven fibers ensure long-lasting protection against algae, odor-causing bacteria, mold, mildew, and biofilms that might otherwise grow on the cartridge surface.
   Pleated Polypropylene Cartridges are 100% polypropylene and offer high flow rates and low pressure drops. Ideal for applications requiring absolute-rated pleated filtration. Cartridge components are thermally bonded for high strength.
Purchase cartridges separately.