Cole-Parmer 100-230 VAC 高扭矩的模塊化數字可逆混合系統

Cole-Parmer 100-230 VAC 高扭矩的模塊化數字倒車混合系統

獨特的雙鍵盤操作，完整的混合器調整高達6英尺的距離！

倒數計時器

可逆和時間周期

樣品燈

遙控器

攪拌機頭和遙控器上的IP54等級

多位支架站臺，懸掛，或用磁鐵貼在金屬表面

鎖定功能，防止無意的更改設置

使用全功能，掛件遙控器增加的速度，啟動/停止，設置定時器，電機的方向扭轉，甚至打開樣品燈。該控制器，以及攪拌機頭，符合IP54防護等級，所以這將是能夠承受偶爾飛濺和泄漏。萬能遙控器不需要遠程操控的情況下，可以脫離。

遠程控制器的設計特點，包括舒適的人體工程學的手持式設計，多位架/鉤，多線管理。多位置臺/鉤允許一個簡單的改變的方向支架的臺面停留垂直或水平方向上。支架托架還兼作實驗室晶格上的控制器，鉗，或任何其他的直桿的鉤掛至3/4“（19毫米）直徑和最小長度是3”。兩個按鈕磁鐵通風柜和櫥柜的金屬表面，如在后面的控制器貼上。內置線管理沿背部設有一個軌道，讓遙控線的頂部，左下角，右下角，或中心控制器底部的渠道。控制鎖定功能，可通過遙控器或混頻器的集成控制，通過簡單的開始/暫停按鈕，持續8秒頭。

這鎖定了所有的控制，以防止意外的改變速度或定時器。電源按鈕操作，而在鎖定模式下進行緊急停機，集成的混合光可以打開和關閉，以查看被攪拌的樣品

包括：僅攪拌機：攪拌機頭，6英尺線遠程掛件控制器，可調夾頭（接受桿直徑3/8英寸），夾頭鍵，調音臺系統安裝支撐桿，外接電源，接地電源線和插頭組件。

混合機系統增加：螺旋槳/軸，支撐支架，支架鉗。

Unique, dual-keypad operation allows for complete mixer adjustment up to six feet away!

Countdown timer

Reversing and timed cycles

Sample light

Remote controller

IP54 rating on both mixer head and remote controller

Multiposition bracket for standing, hanging, or affixing to metal surfaces with magnets

Lockout feature to prevent inadvertent setting changes

Use the full-function, pendant remote controller to increase the speed, start/stop, set the timer, reverse the direction of the motor, and even turn on the sample light. This controller, as well as the mixer head, meets IP54 ratings so it will be able to withstand occasional splashes and spills. The versatile remote controller can be detached from the mixer head in situations where a remote is not needed.

Controller design features include comfortable ergonomic handheld design, multiposition stand/hook, and multiple-cord management. The multiposition stand/hook allows for vertical or horizontal orientation resting on a countertop with a simple change in the direction of the stand. The stand bracket also doubles as a hook to hang the controller on lab lattice, clamp, or any other straight bar up to 3?4" in (19-mm) diameter and minimum length of 3". Two button magnets on the back of the controller affix to metal surfaces like fume hoods and cabinets. Built-in cord management features a track along the back to allow the remote cord to be channeled out of the top, left bottom, right bottom, or center bottom of the controller.

Control lockout feature is available either via the remote control or from the integrated controls on the mixer head by simply holding the start/pause button for 8 seconds. This locks out all controls to prevent inadvertent speed or timer changes. The power button operates while in lockout mode for an emergency stop, and the integrated mixing light can be turned on and off to view the samples being stirred.

What's included:

Mixer only: mixer head, remote pendant controller with 6-ft cord, adjustable chuck (accepts rod up to 3/8 inch diameter), chuck key, mounting support rod, external power supply, and grounded power cord and plug assembly.

Mixer system adds: propeller/shaft, support stand, and support clamp.