Cole-Parmer?計量泵更換管組中流量范圍科爾 - 帕默蠕動泵，流量范圍從0.007到17.4 GPH

Cole-Parmer?計量泵更換管組中流量范圍科爾 - 帕默蠕動泵，流量范圍從0.007到17.4 GPH

泵流速高達158.5 GPH，壓力高達125 psi的輸出量，不受背壓改變影響

自吸泵，甚至對最大線壓力

NEMA 4X和IP66額定沖洗

多個I / O控制和報警模式

免維護，直流無刷電機，量程比2500:1

選擇水泵實現流量高達158.5 GPH（600 LPH）和壓力高達125磅（8.6條），根據您的特殊應用。泵的性能允許使用水的吸升高度為30英尺（9米）。保持盡可能簡單的化學相容性，管與流體相接觸的唯一材料。這些泵可以達到最大的壓力通過順時針或逆時針旋轉，安裝情況給予了極大的靈活性。與菜單驅動的軟件操作方便的數字觸摸板，使這些泵非常容易操作。VGA圖形多色背光液晶顯示本地/遠程控制狀態，電機轉速，輸出率，輸入信號值，以及服務和報警狀態。英語，西班牙語，法語或德語等多種語言的顯示屏可以呈現的信息。A封裝Tube故障檢測系統（TFD）感官管故障檢測泵送化學品的存在，在頭部。內置糾錯防止假觸發。SCADA輸入包括4至20 mA，0?10 VDC，遠程外部速度控制脈沖輸入，觸點閉合遠程啟動/停止和0至30 VDC。輸出包括一個可擴展的4至20 mA或脈沖，一個250伏/ 6的繼電器三115 VAC / 1封A接點分配給監控多達17種不同的泵功能，包括TFD，F(xiàn)VS，遠程/本地的控制設置，馬達，Norprene?泵管套故障，目前的經營模式，和其他泵的標準配備。Norprene管符合FDA標準的食品，并提供優異的耐化學性。泵用Norprene化工管（優異的耐化學性）和Tygothane?管（油，油脂，燃料使用）。

包含：

僅適用于74203-01-74203-26 SKU：用Norprene管組，10英尺（3米）PVC吸液管，PE排放管，注塑配件，腳踏過濾器，安裝支架10英尺（3米）。和電源線（115 VAC型號有美國標準插頭; 220 VAC CE標志型有歐盟插件）

SKU 74203-41-74203-69：電源線（115 VAC型號有美國標準插頭; 220 VAC CE標志型有歐盟插頭）

Pumps, Metering Pumps Replacement Tube Set for Mid-Flow Range Cole-Parmer Peristaltic Pumps, flow range from 0.007 to 17.4 GPH

Pump at flow rates up to 158.5 GPH and pressures up to 125 psi—output volume is not affected by changes in back pressure

Self priming even against maximum line pressure

NEMA 4X and IP66 rated for washdown

Multiple I/O control and alarm modes

Maintenance-free, brushless DC motor with a 2500:1 turndown ratio

Choose a pump to achieve flow rates up to 158.5 GPH (600 LPH) and pressures up to 125 psi (8.6 bar) depending on your particular application. The pump performance allows for 30 feet (9 meters) of suction lift using water. Keeping chemical compatibility as simple as possible, the tubing is the only material in contact with the fluid. These pumps can achieve maximum pressure via a clockwise or counterclockwise rotation, giving great flexibility to your installation situation.

Operator-friendly digital touch pad with menu-driven software make these pumps very easy to operate. The VGA graphic multicolor, backlit LCD displays remote/local control status, motor speed, output rate, input signal values, and service and alarm status. Multilingual display can present the information in English, Spanish, French, or German. A Tube Failure Detection (TFD) system senses tube failure by detecting the presence of the pumped chemical in the head. Built-in error correction prevents false triggering. 

SCADA inputs include 4 to 20 mA, 0 to 10 VDC, pulse inputs for remote external speed control, and 0 to 30 VDC for contact closure remote start/stop. Outputs include a scalable 4 to 20 mA or pulse; one 250 VAC/6 A relay; three 115 VAC/1 A contact closures assignable to monitor up to 17 different pump functions including TFD, FVS, remote/local control setting, motor on, fault, current operating mode, and others. 

Pumps come standard with Norprene? tube sets. Norprene tubing meets FDA criteria for food and offers excellent chemical resistance. Pumps with Norprene Chemical tubing (for superior chemical resistance) and Tygothane? tubing (for use with oils, greases, and fuels) are available online.

What's Included:

Only for SKUs from 74203-01 to 74203-26: Norprene tube set, 10 ft (3 m) of PVC suction tubing, 10 ft (3 m) of PE discharge tubing, injection fitting, foot strainer, mounting brackets. and power cord (115 VAC models have U.S. standard plug; 220 VAC CE-marked models have EU plug)

For SKUs 74203-41 to 74203-69: power cord (115 VAC models have U.S. standard plug; 220 VAC CE-marked models have EU plug)