Masterflex? 07553-77 L / S ?變速模塊化驅動器，6至600轉，230 VAC

Masterflex? L / S ?變速模塊化驅動器，6至600轉，230 VAC

Masterflex? L/S? variable speed modular drive, 6 to 600 rpm, 230 VAC, CE-approved.

模塊化驅動器，可將電機和控制器放置于方便空間有限的地方。

流量：0.36至3400 mL / min，取決于管道尺寸和驅動器轉速，達到低流速墨盒或多通道泵頭和微孔管。

6英尺（1.8米）電纜連接電機和控制器將電動機和控制器方便。

電機的正反轉，讓您清除前或后抽，或在任一方向的泵管。

獨立的單圈電位器和開/關/反向開關與慣性中心。保持速度，同時開/關/反向旋轉驅動。

軟啟動電機反電動勢速度控制為±2％;免除或轉移的準確度和精確度。

115伏電機UL和cUL上市; 230 VAC型號07553-77符合CE法規。

ABS塑料控制器外殼;環氧樹脂成品鋼材驅動外殼。控制器具有防濺保護;電機是耐化學腐蝕。

6英尺（1.8米）線115 VAC：美國標準插頭230 VAC：IEC 320/CEE22插座的。指定國家，以獲得正確的插頭/電源線

Modular drives let you place motor and controller where convenient—ideal for limited or awkward spaces

Flow rate: 0.36 to 3400 mL/min depending on tubing size and drive rpm; achieve lower flow rates with cartridge or multichannel pump heads and microbore tubing.

6-ft (1.8-m) cable connects motor and controller—place motor and controller where convenient.

Reversible motor lets you purge tubing before or after pumping, or pump in either direction.

Separate single-turn potentiometer and on/off/reverse switch with inertia center. Maintain speed while turning drive on/off/reverse.

Soft-start motor with back EMF for ±2% speed control; dispense or transfer with accuracy and precision.

115 VAC motors are UL- and cUL-listed; 230 VAC model 07553-77 complies with CE regulations.

ABS plastic controller housing; epoxy finished steel drive housing. Controller is splash-resistant; motor is chemical resistant.

6-ft (1.8-m) line cord—115 VAC: U.S. standard plug; 230 VAC: IEC 320/CEE22 socket. Specify country to receive correct plug/cord set.