Cole-Parmer 聚偏二氟乙烯?外殼，接地PH電極 970672

Cole-Parmer 聚偏二氟乙烯?外殼，接地PH電極

Cole-Parmer? Grounded Submersible pH Electrode with Kynar? Housing

幾秒內更換電極套筒

扁面自潔 - 防止電極堵塞

這些自潔，雙結電極有扁測量面，以盡量減小電極涂層，劃傷，破損。流體流過表面起到凈化作用，延長您的電極壽命并提高了性能！

可替換套筒讓你保持你原有外殼。環形結，防止堵塞，并允許快速，穩定的響應。使用粘性溶液與硫化物或重金屬。

選擇CPVC或化學耐的Kynar  ?   外殼（，外殼包括電極盒）。所有5電極風格額定在170oF（76oC）到100磅; 50 PSI在212oF（100°C）。

鍍錫端溫度元件連接（適用時），氟橡膠O環，和說明。使用所有型號的前置放大器套件（另售）進行遠程安裝到1000英尺遠。

CPVC和KYNAR組件不可互換。這種潛水式電極適合系統外校準水槽，但在安裝時提供了不正確的讀數。一個解決方案的地面和內部電池供電的接地回路中斷戰斗干擾。內置放大器電極盒允許長電纜運行。

Replace electrode cartridges in seconds!

Flat surfaces are self-cleaning - prevents electrode clogging

Ground loop interrupt eliminates electrical interference

These self-cleaning, double-junction electrodes have flat measuring surfaces to minimize electrode coating, scratching, and breakage. Fluid flow across the surface provides a cleaning action that extends the life of your electrode and improves performance! 

Replaceable cartridges allow you to keep your original housing. Annular junction prevents clogging and allows fast, stable response. Use in viscous solutions with sulfides or heavy metals. 

Select CPVC or chemical-resistant KYNAR ?  housings (housings include one electrode cartridge). All five electrodes styles are rated to 100 psi at 170oF (76oC); 50 psi at 212oF (100oC). 

Electrode assemblies include a 10-ft detachable cable with BNC pH connector, tinned-ends temperature element connector (when applicable), VITON O-rings, and instructions. Use all models with a preamplifier kit (sold separately) for remote mounting up to 1000 feet away.CPVC and KYNAR components are not interchangeable.This submersible electrode is ideal when your system calibrates outside your tank but gives incorrect readings when installed. Combat interference with a solution ground and internal battery powered ground loop interrupt. Built-in amplifier in electrode cartridge permits long cable runs.