 |
Masterflex I / P數字處理驅動器與不銹鋼外殼，0.1至650轉，90到260 VAC
Masterflex I/P Digital Process Drive with Stainless Steel Housing; 0.1 to 650 rpm, 90 to 260 VAC
Precision digital drives offer three dispensing modes and precision low-maintenance motors
Minimum flow rate is 0.0006 LPM (0.0001 GPM); maximum flow rate is 19 LPM (5.0 GPM) with the I/P High-Performance pump head or 26 LPM (6.9 GPM) with two stacked I/P Easy-Load or Standard pump heads
Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.
Menu-driven interface lets you select one of seven languages for programming and operation
Dispense by mL—volume in mL of each dispense, 0.001 to 9999 mL; Copy—1 to 9,999 dispense cycles; or SEC—time interval between each dispense cycle (1 to 9,999 secs)
Anti-drip function ensures dispense accuracy
Reversible motor—purge tubing before or after pumping; pump fluid in either direction
Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
Powerful motors let you stack 2 pump heads with any tubing formulation for increased flow rates and for multichannel applications
Remote control capabilities via watertight connection
– Speed control input scalable 0 to 20 mA, 4 to 20 mA, or 0 to 10 V
– Pumping direction requires open collector or contact closure
– Start/stop/purge requires open collector or contact closure
– Tachometer output scalable 0 to 20 mA, 4 to 20 mA, 0 to 10 V, open collector
Model 77420-10 features a 316 stainless steel housing with an anodized aluminum base. Ideal for pharmaceutical, dairy, biotech, and food and beverage applications.
These full-featured drives give you rugged performance and precise digital control. Ideal for fluid transfer, dispensing, and metering applications in laboratory, process, and industrial environments including pharmaceutical, food & beverage, dairy, chemical, manufacturing, and water treatment.
Precision drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing by time or by volume. To increase dispense accuracy and prevent dripping, programmable anti-drip function briefly reverses motor at end of dispense cycle. Precise PWM speed control (±0.1%) maximizes accuracy and efficiency while the brushless motor gives you quiet, maintenance-free reliability. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size. Program the drive via the simple membrane keypad; keypad lock/unlock feature protects settings.
The IP66, NEMA 4X rated housings are completely sealed, easy-to-clean, and resistant to commonly used cleaning and sanitizing solutions. The reversible, maintenance-free brushless motor offers a full complement of remote control capabilities allowing easy integration into your automated processes. Drives feature a membrane keypad for easy programming. Select tubing size and enter desired flow rate—drive locks in required rpm.
What's Included:
6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering
| Specifications | ||
| Max flow rate (mL/min) | 26000 | |
| Min flow rate (mL/min) | 0.6 | |
| Control type | Digital Variable Speed | |
| Flow rate with I/P 26 tubing (LPM) | 0.01 to 4.0 | |
| Flow rate with I/P 26 tubing (GPM) | 0.002 to 1.1 | |
| Flow rate with I/P 70 tubing (GPM) | 0.002 to 2.1 | |
| Flow rate with I/P 88 tubing (LPM) | 0.02 to 17.0 | |
| Flow rate with I/P 82 tubing (LPM) | 0.02 to 13.0 | |
| Flow rate with I/P 70 tubing (LPM) | 0.01 to 8.0 | |
| Flow rate with I/P 88 tubing (GPM) | 0.005 to 4.5 | |
| Product Type | Masterflex I/P Drive | |
| Flow rate with I/P 82 tubing (GPM) | 0.005 to 3.5 | |
| Flow rate with I/P 89 tubing (LPM) | 0.03 to 19.0 | |
| Flow rate with I/P 73 tubing (LPM) | 0.01 to 8.0 | |
| Flow rate with I/P 73 tubing (GPM) | 0.002 to 2.1 | |
| Flow rate with I/P 89 tubing (GPM) | 0.007 to 5.0 | |
| Power (Amps) | 4.5 A at 115 VAC; 2.5 A at 230 VAC | |
| Motor (hp) | 3/8 | |
| Motor (watts) | 280 | |
| Reversible motor | Yes | |
| rpm | 0.1 to 650 | |
| Digital dispensing | Yes | |
| Dimensions (Drive) | 16.7" x 11.1" x 12.9" (42.4 x 28.2 x 32.8 cm) | |
| Speed control | ±0.1% | |
| No. of Pump heads accepted | 2 | |
| Type of Pump heads accepted | I/P Standard, I/P Easy-Load, I/P High-Performance | |
| Brand | Masterflex | |
| Model | 77420-10 | |
| Manufacturer number | 77420-10 | |
精密數字驅動器提供三種分配模式和精度低維護電機
最小流量為0.0006 LPM（0.0001 GPM），高性能I / P泵頭或26 LPM（6.9 GPM）有兩個疊放I / P易裝或標準泵，最大流量19 LPM（5.0 GPM）頭
圖形液晶顯示四種工作模式，連續運行，定時分配，復制分配量分配。泵的性能不斷。
菜單驅動的界面，可以選擇七種語言，編程及操作
免除毫升每毫升容積分配，0.001?9999毫升;復制1至9,999點膠周期;或SEC時間每次分配周期之間的時間間隔（1到9,999秒）
防滴漏功能，確保免除準確性
在任一方向可逆電機吹掃之前或之后抽泵液管
無刷免維護電機提供±0.1％的速度控制精度1量程比6000
強大的馬達讓你疊2泵頭任何油管制定的流速增加，多通道應用
遠程控制功能，通過水密連接
- 可擴展速度控制輸入0至20 mA，4至20 mA，0?10 V
- 抽水方向需要集電極開路或觸點閉合
- 啟動/停止/清除需要集電極開路或觸點閉合
- 可擴展的轉速計輸出0至20 mA，4至20 mA，0?10 V，集電極開路
型號77420-10 316不銹鋼外殼，陽極氧化鋁基地。制藥，乳品，生物技術，食品和飲料應用的理想選擇。
這些全功能的驅動器給你堅固的性能和精確的數字控制。流體輸送，分配，在實驗室和計量應用過程中，包括制藥，食品飲料，乳品，化工，制造，水處理和工業環境的理想選擇。精密驅動器具有可編程分配間隔，可以讓你設置之間的延遲免除方便，自動點膠周期按時間或按體積。為了提高分配的準確性和防止滴水，可編程防滴漏功能簡要電機反轉點膠周期結束。精確的PWM速度控制（±0.1％）的精度和效率最大化，而 ??無刷電機，為您提供安靜，免維護可靠性。程序校準，確保分配和顯示精度驅動器存儲校準值每管大小。計劃器通過簡單的鍵盤膜，鍵盤鎖定/解鎖功能保護設置，NEMA 4X，IP66額定外殼是完全密封，易清潔，耐常用的清洗和消毒液。可逆的，免維護的無刷電機提供了完整的遠程控制功能，方便地集成到自動化流程。驅動器配有鍵盤膜，易于編程。選擇管的大小，然后輸入所需的流量驅動器鎖在所需的轉速。包括： 6英尺（1.8米）線與IEC 320/CEE22插座。這些模型是特定國家的插頭/電源線出貨，訂貨時請注明最終目的地
?
| 產品規格 | ||
| 最大流量（毫升/分鐘） | 26000 | |
| 最小流量（毫升/分鐘） | 0.6 | |
| 控制類型 | 數字變頻調速 | |
| 流量與I / P 26管（LPM） | 0.01?4.0 | |
| 流量與I / P 26管（GPM） | 0.002至1.1 | |
| 流量與I / P 70管（GPM） | 0.002至2.1 | |
| 流量與I / P 88管（LPM） | 0.02至17.0 | |
| 流量與I / P 82管（LPM） | 0.02?13.0 | |
| 流量與I / P 70管（LPM） | 0.01至8.0 | |
| 流量與I / P 88管（GPM） | 0.005至4.5 | |
| 產品類型 | 的Masterflex I / P驅動器 | |
| 流量與I / P 82管（GPM） | 0.005至3.5 | |
| 流量與I / P 89管（LPM） | 0.03至19.0 | |
| 流量與I / P 73管（LPM） | 0.01至8.0 | |
| 流量與I / P 73管（GPM） | 0.002至2.1 | |
| 流量與I / P 89管（GPM） | 0.007至5.0 | |
| 功率（安培） | 在115 VAC 4.5 2.5在230 VAC | |
| 馬力（HP） | 3/8 | |
| 電機功率（瓦） | 280 | |
| 電機的正反轉 | 是 | |
| 轉 | 0.1至650 | |
| 數字分配 | 是 | |
| 尺寸（驅動器） | 16.7“×11.1”×12.9“ （42.4所述28.2所述32.8厘米） | |
| 速度控制 | ±0.1％ | |
| 接受泵頭號 | 2 | |
| 接受泵頭類型 | I / P標準，I / P易裝，I / P高效 | |
| 牌 | 的Masterflex | |
| 模型 | 77420-10 | |
| 制造商數量 | 77420-10 | |
?
?
?
| 
| 
| |||||||||||||||||||
購買咨詢
（已有0條咨詢）商品評論
（已有0條評論）購買流程
1.購買產品：點擊“立即購買”→填寫產品數量、聯系方式并提交→會員顧問訂單處理→合同簽訂。
2.咨詢產品：請聯系會員顧問或致電會員客服電話。
3.如果您還不是我們的會員，請先注冊。
4.最小起訂數量：1 ，進口產品貨期，請跟產品擔當聯系！
品牌擔當：
投訴電話：17717909117
聯系方式: 電話：021-52069907 分機 或撥0轉總機,傳真：010-52060857
維修流程
- 1、技術溝通，初步判斷問題電話,與客戶進行初步溝通、了解并初步判斷儀器所出現的故障問題。
- 2、簽訂維修協議由我公司向客戶發送儀器維修協議，客戶需如實填寫內容并回傳以便我司對儀器做進一步判斷。
- 3、客戶郵寄儀器客戶可按照我司地址郵寄儀器，并將快遞單拍照發送至您的專屬客服進行備案。
- 4、詳細診斷機器故障我司收到郵寄儀器后會對郵寄的儀器進行拍照并開箱檢驗，對儀器做進一步故障判斷。
- 5、支付維修費用如客戶儀器在保修期內，我司不收取任何維修費，如客戶儀器在保修期外，我司會適當收取維修費。
- 6、郵寄儀器給客戶我司將維修好的儀器按客戶地址進行拍照并郵寄，自此雖維修協議終止，但我司將提供終身免費答疑及技術指導。
| Testo 340 煙氣分析儀 | Testo350 煙氣分析儀 | PMS塵埃粒子計數器 | TSI塵埃粒子計數器 | Lighthouse塵埃粒子計數器 | Metone塵埃粒子計數器 |
| HACH塵埃粒子計數器 | TSI氣溶膠發生器 | ATI氣溶膠發生器 | Palas氣溶膠發生器 | Topas氣溶膠發生器 | Palas靜電中和器 |
| Topas靜電中和器 | Grimm粒徑譜儀 | TSI粒徑譜儀 | Topas粒徑譜儀 | Palas粒徑譜儀 | TSI掃描電遷移率粒徑譜儀 |
| HTV 甲醛檢測儀 | HTV-M甲醛檢測儀 | TVOC 檢測儀維修 | Grimm掃描電遷移率粒徑譜儀 | Palas掃描電遷移率粒徑譜儀 | Brechtel掃描電遷移率粒徑譜儀 |
| TSI 8530粉塵儀 | TSI 8532粉塵儀 | TSI 8533粉塵儀 | Rad7 氡檢測儀 | TSI 8534粉塵儀 | Thermo PDR-1500粉塵儀 |
| ATI 2i光度計 | ATI氣溶膠稀釋器 | 風量罩 | 風速儀 | 空氣品質檢測儀 | EN779測試臺改造 |
| Dustmate 粉塵儀 | TSI 8108大顆粒氣溶膠發生器 | TSI 3450單分散氣溶膠發生器 | 車身氣密性檢測設備 | 風管漏風量測試設備 | 凝聚核粒子計數器校準裝置 |
| 粒子計數器校準裝置 | 更多型號請咨詢客服19mro@19mro.com |
相關商品