Cole-Parmer T53/6-022-13G 浮子流量計

Cole-Parmer T53/6-022-13G 浮子流量計

專為高純度環境設計的流量計，應用靈活，適用的氣體范圍廣泛。

緊湊的外形型設計，非常適合在狹小的環境里使用。

量程范圍大，最小流量小于最大流量的十分之一

高精度閥允許對流量進行監控和控制

用聚四氟乙烯替代了金屬元件，避免了在高純度環境下的潛在污染。玻璃管采用熔融陶瓷作為一個精確的，永久性測量參照物。此外，一個垂直的切向定位線保證了測量的準確性。面板的放大系數為16%，進一步提高了儀器的可讀性。每個流量計由一個安裝在白色壓克力背板（1/8“厚）和陽極氧化鋁框架上的厚壁玻璃流量管組成。

選擇一個帶有閥門的流量計用來控制流量。標準閥適用于對精度需求不高的情況下。高精度閥設有一個微調的16轉“非提升式閥門”可以更精確的控制流量。

所有流量計配有相關的數據表，幫助測量在標準溫度和壓力（STP）下的水和空氣的相關數據。

Designed for high-purity applications with flexibility for a broad array of gases

Compact design is ideal for small panels or cramped workspaces

High turndown—minimum flow rate is less than one-tenth of maximum flow

High-precision valve option allows monitoring and control

The substitution of metal fittings with PTFE eliminates a potential contamination source for high-purity applications. The glass tube utilizes a fused ceramic scale for a precise, permanent measuring guide. In addition, a vertical-tangential locator line provides readings with hairline accuracy. Further improving readability is a front shield that magnifies the scale 16%. An anodized aluminum frame protects the heavy-walled glass flowtube; a white acrylic backplate protects and enhances viewing in the protective frame. 

Select a flowmeter with a valve for flow rate control. The standard valve is suitable where high resolution metering is not essential. The high precision valve features a fine-adjust 16-turn “non-rising stem” to more accurately set your desired flow rate.

All flowmeters come with correlation data sheets for water and numerous gases (listed below) at standard temperature and pressure (STP).