Cole-Parmer 4241CP 高精度溫度計0.00°

Cole-Parmer 4241CP 高精度溫度計0.00°

分辨率為0.01° 

顯示日期和時間/最高溫度 

高和低的可設置的警報 

可溯源至NIST的準確性 

依照國際標準四個數字體溫計為關鍵需求提供所需的確切數據,質量控制檢查,常規測量。單位讀取0.00，25.00，37.00或三者為0.01°的分辨率，±2°C的標準，精度±0.05°C。單位讀取°C和°F。 

防滲不銹鋼探頭 

單位提供的不銹鋼探針顯示溫度變化。探頭是用于液體，空氣/氣體和半固體的。準確的讀數，以1/3英寸的尖端穿透。探針的直徑1/8英寸，制止6-1/4英寸，9英寸總長度為5英尺長的電纜長度。 

單位符合ITS-90國際溫標 

絕對高精度溫度計是理想的，用于測量水浴，小池，燃氣系統，試劑，標準溶液，烘箱，培養箱，藥品，石油產品，食品和廢水的溫度。 

記錄日期和時間最小/最大讀數、高/低報警警報 

顯示屏上顯示最小/最大電流和溫度。最小/最大讀數監測一夜，在任何時間段顯示精確的時間和日期的最小/最大溫度。當溫度上升到高于或下降到低于高和低設置點，報警提供兩個視覺（LED）和兩個音頻警報。單元顯示的確切時間和日期時，雙溫度計警報被觸發。報警器是可編程的增量為0.1°。即使溫度恢復到非報警范圍，視覺和聲音警報持續信號。溫度計的設計允許用戶一鍵式校準。 

包含項目：支架，魔術貼，磁條和壁掛式安裝使溫度計放置在任何地方。提供了的Traceable?證書，不銹鋼探頭和兩節AA電池進行連續1年不間斷監測。

Cole-Parmer Extreme-Accuracy Thermometer 0.00°

Resolution is 0.01°

Displays date and time of min/max temperature

High and low settable alarms

Traceable to NIST for accuracy

Four Traceable International Standards Digital thermometers provide the exact readings required for critical requirements, quality control checks, and routine measurements. Units read 0.00, 25.00, 37.00, or a combination of all three with a resolution of 0.01° and an accuracy ±0.05°C within ±2°C of standard. Units read in °C and °F. 

Impervious stainless-steel probe
Stainless-steel probe supplied with units shows the slightest temperature change. Probe is triple purpose for liquid, air/gas, and semisolids. Accurate readings with tip penetration of 1/3-inch. Probe has a diameter of 1/8-inch, stem length of 6-1/4 inches, overall length of 9 inches and a cable length of 5 feet. 

Unit conforms to ITS-90, International Temperature Standard
Absolute high-precision thermometer is ideal for measuring temperatures in water baths, cuvets, gas systems, reagents, standards solutions, ovens, incubators, pharmaceuticals, petroleum products, foods, and wastewater.

Records time and date for MIN/MAX readings and hi/lo alarm alerts
Display shows minimum/maximum and current temperatures. MIN/MAX monitors readings overnight, on weekends, or for any time period and displays the exact time and date when the MIN/MAX temperature occurred. Alarm provides two visual (LEDs) and two audio alerts when temperature rises above or falls below high and low set points. Unit displays the exact time and date when dual thermometer alarms are triggered. Alarms are programmable in 0.1° increments. Visual and audible alarms signal continuously (for days) even if temperature returns to non-alarm range. First thermometer ever designed to permit user one-button calibration. 

What's Included:
Stand, Velcro?, magnetic strips, and wall mount allow placing thermometer anywhere. Supplied with a Traceable? Certificate, stainless-steel probe, and two AA batteries for continuous, 1-year always-on monitoring.