Honeywell DC2500C00B0020000000000 溫度控制器

Honeywell DC2500C00B0020000000000 溫度控制器

新一代工業通用數字控制器（UDC）

IP66和NEMA 4X級面板允許控制器用于沖洗應用

自整定III ^???模糊邏輯編程

精確度+ / - 0.25％滿量程，16位分辨率

可在1/4-DIN規模包括設定點編程

這些微處理器為基礎的控制器是新一代的UDC控制器，并提供了高度的功能性和可靠性。調節溫度在各種應用，包括爐，烤箱，環境試驗箱，包裝機械，塑料加工及更多的理想選擇。
特點診斷功能監控條件下的熱電偶，以確定它是否是良好的，失敗的，或即將發生的故障的危險。
加熱器斷路器報警輸出電路不斷檢查，確保加熱器沒有失敗。
自整定III ^???軟件與模糊邏輯抑制超調，真正的即插即用和播放的調諧算法調整雙工控制的加熱和冷卻側
通用電源。供應涵蓋90至264 VAC，50/60 Hz，這符合全球標準交流電壓的電壓范圍，
可以配置為兩個本地設定值或一個地方和一個遠程設定點的設置點。（型號89556-40至89556-43）
PV熱啟動允許，控制器初始化本地設定點在目前的PV值時，電源功率損耗的情況下啟動。
雙集微調：可以選擇配置的PID參數自動根據PV或SP值。
第二 ??個輸入選項提供了第二個線性電壓或電流輸入。
提示雙行LED顯示多語言組態能力。上一個4字符顯示屏和6個字符，14段字母數字顯示。
高/低限控制器（型號89556-44）的目的是提供一個安全切斷和可選的報警。鎖存繼電器輸出被激活時工藝參數超過或低于所需的值，必須手動重置進程能夠繼續下去之前提供故障安全截止。特點通用輸入和FM認證。
這些產品或其他形式可供選擇，特殊訂貨控制器的更多信息，請致電我們的應用專家。

Next generation of industrial universal digital controllers (UDC)

IP66- and NEMA 4X-rated faceplate allows the controller to be used in washdown applications

Accutune III^? fuzzy logic programming

Accuracy of +/- 0.25% full-scale, 16-bit resolution

Available in 1/4-DIN sizeIncludes setpoint programing

These microprocessor-based controllers are the next generation of UDC controllers and offer a high degree of functionality and reliability. Ideal for regulating temperature in a variety of applications including furnaces, ovens, environmental chambers, packaging machinery, plastic processing and more. 
Features Diagnostic feature monitors the condition of the thermocouple— to determine whether it’s good, failing, or in danger of imminent failure.
Heater breaker alarm continuously checks the output circuit to ensure the heater has not failed.
Accutune III^? software with fuzzy logic overshoot suppression, and true plug-and-play tuning algorithm to tune both the heat and cool side of a duplex control.
Universal power supply covers voltage range of 90 to 264 VAC, 50/60 Hz, which conforms to the standard AC voltages found worldwide.
Set points that can be configured for either two local setpoints or one local and one remote setpoint. (models 89556-40 thru 89556-43)
PV hot start allows the controller to initialize the local setpoint at the current PV value upon power start up in the event of power loss.
Dual set tuning: configured PID parameters can be selected automatically based upon the PV or SP value.
Second input option provides a second linear voltage or current input.
Dual line LED with the capability of displaying multi-language configuration prompts. A 4 character upper display and a 6 character, 14-segment, alphanumeric lower display.
High/Low Limit Controller (model 89556-44) is designed to provide a safety shut-off and optional alarm. A latched relay output is activated when the process parameter either exceeds or falls below the desired value, providing a fail-safe cutoff which has to be manually reset before the process can continue. Features universal input and is FM approved.
Call our Application Specialists for more information on these products or to special order a controller with other options.