Red Lion IAMS0010 信號調節器

Red Lion IAMS0010 信號調節器

模塊可被編程超過100輸入/輸出配置組合！

通用輸入，程序，毫安直流，直流電壓，TC，RTD，電位器，線性電阻

通用電源，21.6?253 VAC/19.2至300 VDC

3路隔離（電源/信號/輸出）

選擇設定值和/或模擬輸出模式

IAMS-通用信號調理器，無與倫比的能力，為用戶提供了極大的靈活性。作為信號調理器，提供完整的隔離和轉換功能，以滿足任何應用程序。通用輸入接受過程，直流電流，直流電壓，熱電偶，熱電阻，電位器，線性電阻信號，使模塊可以連接到最常見的傳感器。雙A型繼電器設定模式具有雙設定值控制能力。模擬模式具有轉播模擬信號功能。第三模式，同時提供模擬控制能力。電源也普遍接受21.6到253伏/ 19.2 - 300 VDC電源。添加可選編程模塊，本機很容易通過菜單編程。該模塊不用時，也可顯示IAMS具有超過100個的組合輸入到輸出配置。輸入特定的終端允許的各種信號和傳感器連接到該機，而輸入范圍和分辨率調整輸入編程循環。菜單式編程-使用PGMMOD編程模塊，用戶可快速和容易設置。該模塊所需程序是IAMS。不過，如果你使用多于一個 IAMS，只有一個編程模塊是必需的。該模塊可以存儲編程從一個單位，并加載到第二單元設置時間減少為多個裝置。當沒有被用于編程的編程模塊，它可以顯示輸入參數，就像一個面板儀表。機體整體滿量程精度比例超過0.1％通常取決于選擇的范圍。基于微處理器的設計方便字段擴展和機載E2PROM存儲值以備將來之需所有單位來工廠預校準的所有輸入和輸出范圍。工廠或自定義字段縮放可選擇高級編程循環。如需，IAMS可工廠重新調整。

Modules that can be programmed for over 100 combinations of input/output configurations!

Universal input, process, mA DC, VDC, TC, RTD, Potentiometer, and linear resistance

Universal power supply, 21.6 to 253 VAC/19.2 to 300 VDC

3-way isolation (power/signal/output)

Choose setpoints and/or analog output models

The IAMS — Universal Signal Conditioners unmatched capability provides users the ultimate in flexibility. As a signal conditioner, the unit provides complete isolation and conversion capability to satisfy almost any application. The Universal Input accepts Process, DC Current, DC Voltage, Thermocouples, RTDs, Potentiometers, and Linear Resistance signals allowing the module to be connected to most common sensors. The setpoint model allows dual setpoint control capability through dual Form A relays. The analog model provides a retransmitted analog signal. A third model provides both analog and control capability. The power supply is also universal, accepting 21.6 to 253 VAC/19.2 to 300 VDC as its power source. Add the optional programming module and the unit is easily programmed through menu style programming. The module can also be used to provide a display of the process variable when it is not being used for programming.

The IAMS features well er 100 combinations of inputs to outputs configurations. Input specific terminals allow for the various signals and sensors to be connected to the unit while the input ranges and resolutions are adjusted in the input programming loop of the unit. The menu style programming allows the user quick and easy set-up by using the PGMMOD, programming module. The module is required to program the IAMS. However, if you are using more than one IAMS, only one programming module is required. The module can store programming from one unit and load it to a second unit reducing set-up time for multiple installations. When the programming module is not being used for programming, it can indicate the input parameters, just like a panel meter.

The unit’s overall full scale accuracy typically exceeds 0.1 % depending on the range selection and scaling. The microprocessor based design provides ease of field scaling and the onboard E2PROM stores scaling values for future recall. All units come factory precalibrated for all input and output ranges. Factory or custom field scaling can be selected in the Advanced programming loop. The

IAMS can be factory recalibrated in the field if desired.