TQC PA-2055 11齒2mm特粗刀片

PAT的油漆通過Gardco產生附著力測試套件包含所有需要的工具和材料，除了多齒刀具刀片，用于根據ASTM測試進行粘附性試驗在施加到一個平坦，均勻的表面涂料方法D 3359，方法B和DIN標準號53151的多齒刀片分開布置，以允許在各種可用的設計選擇。

全新的人體工程學手柄設計給人舒適和精確的控制。 它有助于保持你的手在自然的位置，避免緊張和疲勞。 對于無論是左手或右手的人都適用手柄。 由于該間距的準確性和與該測試可以進行的速度，所述多個齒銑刀是用于優選的工具在本試驗中，除了當評估必須施加到表面上，它們既不是平坦的或相對平滑的涂層制成。 在這些不利條件下單刀片式銑刀，通常需要根據ASTM的方法的。 一個多齒刀具附著力管道也可用。

多種尖端切割機可與引導牙齒和六齒間距在1.0毫米至2.0毫米。 該1.0毫米間距也可與11齒，引導牙齒。 可用無導向齒銑刀11齒間距1.5毫米。 

?

該套件包括新的刀片架/測試儀的手柄，內六角扳手用于更換刀片，剝落刷，10倍的LED手持放大鏡 電池/瓦特（放大鏡有2個LED燈和1.5“玻璃鏡片），磁帶- PA-280630 *，副本的ASTM測試方法D-3359用作教學指導，以及一個堅固的塑料手提箱帶手柄，所有的組件都嵌套在層壓模切泡沫的情況之內。

?

The P-A-T Paint Adhesion Test Kit produced by Gardco contains all of the tools and materials needed, except for the multi-tooth cutter blade, for conducting adhesion tests on paints applied to a flat, uniform surface in accordance with ASTM Test Method D 3359, method B and DIN Standard No. 53151. The multi-tooth cutter blade is furnished separately to permit choice among the various available designs.

?

The new ergonomic handle design gives comfortable and precision control. It helps keep your hand in a natural position, preventing strain and fatigue. One handle for both the right or left handed person. Due to the accuracy of the spacings and the speed with which the test can be conducted, the multiple tooth cutter is the preferred tool for use in this test except when evaluations must be made on coatings applied to surfaces which are neither flat or relatively smooth. Under these adverse conditions a single razor blade type cutter is often desirable under method A of ASTM. A Multi-Tooth Adhesion Cutter for pipe is also available.

?

Multiple tip cutters are available with guide teeth and six spaced teeth at 1.0 and 2.0mm. The 1.0mm spacing is also available with eleven teeth and guide teeth. Available without guide teeth are cutters with eleven spaced teeth at 1.5mm. Also note other cutter blades illustrated in the dimensional drawings. (Ask for information on special variable spaced cutters and cutters for curved surfaces.)

?

The kit includes the new blade holder / handle with guide, hex wrench for changing blades, flaking brush, 10x LED hand held magnifier w/batteries (magnifier has 2 LED lights and 1.5" glass lens), tape - PA-280630*, copy of ASTM Test Method D-3359 for use as as instruction guide, and a sturdy plastic carrying case with handle. All of the components are nested in laminated diecut foam within the case.