TQC PA-346500S 測試盤/組，鋼鐵，直徑50mm/M10

齊全的應用覆蓋 

這三種型號的DY-2在最大拉力上存在差異化。 而DY-216（15.5千牛，3485磅）是覆蓋應用最多的型號，DY-206（6千牛1349磅）是低強度應用，如砂漿的測試粘接的精度和渲染強度。 DY-225（25千牛頓，5620磅），可用于非常高強度的應用，如混凝土結構或測試的修復和覆蓋材料的粘結強度纖維增強的聚合物的測試。

恒定負荷率 

一個上拉脫試驗的結果的主要影響是在一個恒定的負載率的影響。 新推出的DY-2機型與集成，反饋控制的電機完全刪除變量，通過在其中可以驗證一個恒定的負載率提供了一個完整的自動化測試。

獨特的參數設置 

該DY-2是進一步獨一無二的，它記錄了規范所要求的每一個測試參數：測試時間和日期，測試盤大小，采用最大負荷，自動計算的粘結強度，適用于負載率與圖形記錄，完成時間測試以及故障模式。 在第一時間，操作者能夠提供的拉脫試驗的完整記錄，證明該試驗是按照適用的標準。

Complete range of applications covered

The three models of the DY-2 Family differentiate by a maximum pulling force. While DY-216 (15.5 kN, 3485 lbf) is covering most applications, DY-206 (6 kN, 1349 lbf) has an increased accuracy for low strength applications such as testing adhesive strength of mortars and renders. DY-225 (25 kN, 5620 lbf) can be used for very high strength applications such as testing of fibre reinforced polymers bonded to concrete structures or testing the bond strength of repair and overlay materials.

Constant load rate

One of the major influences on the result of a pull-off test is the operator influence in the application of a constant load rate. The newly introduced DY-2 models with their integrated, feedback controlled motors remove this variable completely, by providing a fully automated test at a constant load rate which can be verified.

Unique in parameter setting

The DY-2 is further unique in that it records every single test parameter required by the specification: Time and date of the test, test disc size, maximum load applied, automatic calculation of bond strength, applied load rate with graphical record, complete time of test as well as the failure mode. For the very first time, the operator is able to provide a complete record of the pull-off test, proving that the test was carried out in accordance with the applicable standard.