DESCRIPTION: 

MOLY-PAUL 707 is a Molybdenum Disulphide dispersion in xylene/alcohol solvent with phenolic resin binder.  

TYPICAL USE: 

Used for the lubrication of surfaces and bearings which are subject to solvent attack.  This would include such things as hydraulic fluids and anti-freeze solutions.   Will operate over a wide range of temperatures, i.e. -50°C to 200°C.  

METHOD OF APPLICATION: 

The material is applied by dip, brush or spray onto the pre-treated surface (for metal pre-treatment see Memorandum A.12).   The coating should be stoved at 165°C for 30 minutes.   If a thicker coating is required, each layer should be stoved at 135°C for 15 minutes before adding the next. 

The resultant bond is resistance to attack by Trichloroethylene, Hydrocarbon solvents, polyhydric alcohols, hydraulic fluids, anti-freeze solution, dilute acids and alkalis.  

GENERAL CHARACTERISTICS:  

Carrier Fluid:  1:1 mixture of Xylene/Alcohol.  

Molybdenum Disulphide: Moly-Paul Grade No. 7.  

MoS2 Contents:  10%. 

Flash Point:    10°C (closed).  

SHELF LIFE:     1 year if unopened. 

The product and application data on this page is for information only and since the performance of these products is affected by factors outside the knowledge and control of  

FUCHS LUBRITECH (UK) LTD, no guarantee on respect of the success of any application and no warranty expressed or implied is given other than those implied by the statute law. 

Last revised : 07.07.2004