今日推薦
 | 匯分FKC-I-B空氣浮游塵菌采樣器,浮游菌采樣器
|
 | 匯分7991粉塵氣溶膠發(fā)生器(炭黑,碳黑)
|
總共找到10個商品
 | EUROCUT 444HDS CUTTING OIL 205LT DRUMEurocut 444HDS is a multipurpose higher oil containing biostable semi-synthetic watermix coolant. Whilst not considered a traditional EP Fluid EUROCUT, 444HDS has improved load carrying performance when compared with conventional semi-synthetic fluids. |
|
| | CASTROL HONILO 480 OIL 208LT DRUMCastrol Honilo 480 is a low viscosity, transparent oil designed for a variety of honing operations. Castrol Honilo 480 is fortified with a chlorine additive and contains a fatty oil, making it suitable for severe applications as well as super finishing op |
|
| | ENVIRONTEMP FR3 FLUID 55USG DRUMEnvirotemp FR3 fluid is a bio-based, sustainable, natural ester dielectric coolant for use in distribution and power class transformers where its unique fire safety, environmental, electrical, and chemical properties are advantageous. |
|
| | CIMSTAR 506 CUTTING FLUID 25LTCimstar 506 is a clear, amber, water miscible, non-nitrite, preformed microfine emulsion type cutting fluid concentrate. |
|
| | CIMPERIAL 60C CUTTING FLUID 25LT WAS (MB602C)Cimperial 60-C is a clear, water miscible, semi-synthetic cutting fluid concentrate. |
|
| | DELAPENA EXTRA HONING FLUID 25LT |
|
| | EUROCUT 767LF FLUID LUBRICANT 25LTEUROCUT 767 LF is a multipurpose, semi synthetic water soluble cutting and grinding fluid. It is a long life fluid, formulated for high performance on difficult machining operations with low staining characteristics on aluminium alloys. |
|
| | LUBYSIL BCO14 LUBRICANT 5LTLUBYSIL BCO 14 Is A Unique Ultra Low Viscosity Cutting Fluid. Developed for machining very tough metals in the aerospace and nuclear industries. |
|
 | 3M FLUORINERT FC40 FLUID 1KG3M Fluorinert 氟素化學品有著良好的化學惰性,與電子類部件接觸時,不會對其產(chǎn)生任何腐蝕,使用過后也不需特定的清洗步驟,因此廣泛用作電子測試液體.同時因其出色的熱傳導(dǎo)性也被用做穩(wěn)定的冷卻液. |
|
| | LUBYSIL BCO14 120ML AEROSOLLUBYSIL BCO 14 Is A Unique Ultra Low Viscosity Cutting Fluid. Developed for machining very tough metals in the aerospace and nuclear industries. Increases tools life, improves surface finishes, enables closer tolerances to be maintained and is very well s |
|
