Cole-Parmer C3254PS.3 環形電導率變送器，聚偏氟乙烯（PVDF），0到1000毫秒

Cole-Parmer 環形電導率變送器，聚偏氟乙烯（PVDF），0到1000毫秒

Cole-Parmer? Toroidal Conductivity transmitter, PVDF, 0 to 1000 mS

Cole-Parmer^? Toroidal Conductivity Transmitters

科爾-帕默^?環形電導率變送器

內嵌或潛水安裝

CPVC和PVDF型號

內置100Ω鉑電阻溫度傳感器的溫度補償

無電極電導率傳感器加上一個兩線回路供電的4到20 mA變送器。傳感器需要11至24 VDC電源，并600歐姆最大戰平。如果11至24 VDC電源是不是已經可以，訂單流程表94785-12電源和顯示的傳感器測量，或參閱我們的過程儀表部分其他車型。
孤立的4至20 mA輸出，可用于控制應用，連接到錄像機，或報警。該傳感器具有的溫度系數為0.3％/攝氏度，尺寸為8“長×1-1/2”4-1/2“直徑的插入深度。傳感器配有10英尺電纜采用鍍錫兩端。

In-line or submersible installation

CPVC and PVDF models available

Built in 100 Ω Pt RTD temperature compensation

The electrodeless conductivity sensor is coupled with a two-wire, loop-powered 4 to 20 mA transmitter. The sensor requires an 11 to 24 VDC power supply and has a maximum draw of 600 ohms. If 11 to 24 VDC power is not already available, order process meter 94785-12 to power and display the sensor measurements, or refer to our process meter section for other models.
The isolated 4 to 20 mA output can be used for control applications, connected to a recorder, or an alarm. The sensor has a temperature coefficient of 0.3%/degC, and measures 8''L x 1-1/2'' diameter with 4-1/2'' insertion depth. Sensor comes with a 10-ft cable with tinned ends.