Cole-Parmer 316L不銹鋼，1.5至40 LPM 渦輪流量傳感器

Cole-Parmer 316L不銹鋼，1.5至40 LPM 渦輪流量傳感器

配合使用批次或流量控制器精確控制泵

PFA傳感器符合美國藥典VI級

這些液體渦輪流量傳感器是長期耐腐蝕，在苛刻的情況下，性能無故障。傳感器被放置在轉子葉片的邊緣附近，為所有顏色液體以提供準確的流量測量。通過傳感器連接的紅外光束，流進管里，并轉換為5到30 V方波脈沖輸出。一米的PVC??電線包含RVC插孔輸入到批處理或流量控制器（以下單獨出售）。如果使用記錄儀，面板儀表，或PLC，只需取出千斤頂，露出兩線電纜安裝電壓輸出。安裝這些渦輪流量傳感器到任何位置，他們不需要直流或其他專業安裝。PFA和PVDF一次性可替換的傳感器應用也可以設置為永久流量傳感器。PFA和PVDF傳感器標準配備裝配夾。標準安裝夾;聚丙烯管座我們也可以提供(聯系我們的應用程序專家)傳感器與軟管倒鉤或螺紋管件一起供應。

316L不銹鋼（SS）渦輪傳感器符合化工，醫藥，半導體，環保產業的高壓需求。耐腐蝕性強。

Use in conjunction with batch or flow controller for precise pump control

PFA sensors meet requirements of US Pharmacopeia Class VI

These liquid turbine flow sensors are corrosion resistant for long-term, trouble-free performance in demanding situations. Sensor is positioned in close proximity to the edges of the rotor blades to provide accurate flow measurements for all colored liquids. Flow in your tubing is picked up via the IR beam in the sensor connection, and converted into a 5 to 30 V square wave pulse output. One meter of PVC cable is included with an RVC jack for input into the batch or flow controllers (sold separately below). If using a recorder, panel meter, or PLC, simply remove the jack to expose the two-wire cable for installation of voltage output.

Mount these turbine flow sensors in any position; they do not require a flow straightener or other specialized installation. The PFA and PVDF sensors are replaceable for single-use applications or can be set up as permanent flow sensors. PFA and PVDF sensors come standard with a mounting clip; polypropylene tube holders are also available (contact our Application Specialists). Sensors are available with hose barb or threaded fittings.316L Stainless Steel (SS) Turbine Sensors are rated for high-pressure requirements in chemical, pharmaceutical, semiconductor, and environmental industries. Highly corrosion resistant.