瑞士Sensirion ASL1600-10熱非侵入性低流量流量計,40至1000微升/分鐘
納米和微流測量精密實驗室應用
分辨率可達500 PL/分鐘
響應時間<50毫秒
這些液體質量流量計使超低液體質量流量快速和精確的測量,并與總的介質隔離,很少死體積,以及沒有運動部件進行操作。該流量計檢測到液體的質量流量,通過測量通過玻璃毛細管的管材料的熱傳遞。在毛細管外的微芯片上的熱優化膜的加熱電阻器被保持高于環境溫度。在毛細管內液體流動的情況下,溫度分布的上游和下游被干擾,這種差異進行測量。 CMOSens?sensor技術結合使用的數字信號處理在一個CMOS芯片高精度的熱傳感器元件。此外,CMOSens傳感器技術的數字智能與pc機、PLC等控制器的連接的數字化接口。
所有的測量數據完全校準,并通過內部微控制器來進行溫度補償。優良的耐化學性和生物相容性得到保障,并且處理介質只獲取與所述直傳感器的毛細管接觸。典型應用該傳感器包括精確液體的質量流量和體積測量為分析儀器,醫療器械,和過程控制。型號32611-00至-08校準的只有水。測量信號的優良的重復性仍維持為其他媒體,因而允許計算機或微控制器上后測量校正。模型32611-10被校準為IPA,但也可以用于其它烴類,如乙醇,丙酮,柴油,石油,醚和大多數其他媒體的可重復的測量結果,但是它不與水溶液工作。
包含的內容:
型號32611-00到-04:PC軟件,2微米在線過濾器,OD360PEEK?毛細血管,RS-232數據線,AC適配器,用于110至230 VDC。型號32611-06和-08:PC軟件,UNF10-32裝修,RS-232數據線,AC適配器,用于110至230 VDC。型號32611-10:尾纜,接頭1/8''OD塑料管材、倒刺和镥聯接器。
產品規格 |
|
產品類型 |
質量流量計流量計 |
描述 |
質量流量計 |
準確性 |
3%的測量值> =分鐘流量校準 |
最高工作溫度(oF) |
113 |
最高工作溫度(°C) |
45 |
最大流量壓力降 |
<0.01磅(100帕) |
工作溫度 |
32至140°F(0至60°C) |
電氣連接 |
4針M8 |
品牌 |
Sensirion |
功率 |
7日至18 VDC |
出廠編號 |
ASL1600-10 |
Thermal Non-Invasive Low-Flow Flowmeters, 40 to 1000 μL/min
Nano-and micro-flow measurements for precision laboratory applications
Resolutions down to 500 pL/min
Response time < 50 ms
These liquid mass flowmeters enable extremely fast and accurate measurements of ultra-low liquid mass flows, and operate with total media isolation, very little dead volume, and no moving parts. The flowmeter detects liquid mass flow by measuring heat transfer through the tubing material of a glass capillary. On a microchip outside the capillary, a heating resistor on a thermally optimized membrane is kept above ambient temperature. In the presence of liquid flow inside the capillary, the temperature distribution upstream and downstream is disturbed—this difference is then measured. CMOSens?sensor technology combines a high-precision thermal sensor element with digital signal processing on one single CMOS chip. In addition, the digital intelligence of the CMOSens sensor technology enables digital interfaces that permit an easy link with PCs, PLC, and other controllers.
All measurement data is fully calibrated and temperature compensated by means of an internal microcontroller. Excellent chemical resistance and bio-compatibility are ensured, and the process medium only gets in contact with the straight sensor capillary. Typical applications for this sensor include precise liquid mass flow and volume measurement for analytical instruments, medical devices, and process control. . Models 32611-00 to -08 are calibrated for water only. Superior repeatability of the measurement signal is still maintained for other media and thus allows after-measurement-correction on a computer or microcontroller. Model 32611-10 is calibrated for IPA only but can also be used for repeatable measurements of other hydrocarbons such as ethanol, acetone, diesel, petroleum, ether, and most other media; however it does not work with aqueous solutions.
What's Included:
Models 32611-00 to -04: PC software, 2 μm in-line filters, OD360 PEEK? capillaries, RS-232 data cable, AC adapter for 110 to 230 VDC. Models 32611-06 and -08: PC software, UNF 10-32 fitting, RS-232 data cable, AC adapter for 110 to 230 VDC. Model 32611-10: pigtail cable, fittings for 1/8’’ OD plastic tubing, and barb and luer connectors.
Specifications |
|
Product Type |
Mass Flow Flowmeters |
Description |
Mass Flowmeter |
Accuracy |
3% of measured value at >= calibrated min flow |
Max operating temperature (o F) |
113 |
Max operating temperature (o C) |
45 |
Pressure drop at maximum flow |
<0.01 psi (100 Pa) |
Operating temperature |
32 to 140°F (0 to 60°C) |
Electrical connections |
4-pin M8 |
Brand |
Sensirion |
Power |
7 to 18 VDC |
Manufacturer number |
ASL1600-10 |
|
|
|
| ||||||||||||||||||||||||
|
|
購買咨詢
(已有0條咨詢)商品評論
(已有0條評論)購買流程
1.購買產品:點擊“立即購買”→填寫產品數量、聯系方式并提交→會員顧問訂單處理→合同簽訂。
2.咨詢產品:請聯系會員顧問或致電會員客服電話。
3.如果您還不是我們的會員,請先注冊。
4.最小起訂數量:1 ,進口產品貨期,請跟產品擔當聯系!
品牌擔當:
投訴電話:17717909117
聯系方式: 電話:021-52069907 分機 或撥0轉總機,傳真:010-52060857
維修流程
- 1、技術溝通,初步判斷問題電話,與客戶進行初步溝通、了解并初步判斷儀器所出現的故障問題。
- 2、簽訂維修協議由我公司向客戶發送儀器維修協議,客戶需如實填寫內容并回傳以便我司對儀器做進一步判斷。
- 3、客戶郵寄儀器客戶可按照我司地址郵寄儀器,并將快遞單拍照發送至您的專屬客服進行備案。
- 4、詳細診斷機器故障我司收到郵寄儀器后會對郵寄的儀器進行拍照并開箱檢驗,對儀器做進一步故障判斷。
- 5、支付維修費用如客戶儀器在保修期內,我司不收取任何維修費,如客戶儀器在保修期外,我司會適當收取維修費。
- 6、郵寄儀器給客戶我司將維修好的儀器按客戶地址進行拍照并郵寄,自此雖維修協議終止,但我司將提供終身免費答疑及技術指導。
Testo 340 煙氣分析儀 | Testo350 煙氣分析儀 | PMS塵埃粒子計數器 | TSI塵埃粒子計數器 | Lighthouse塵埃粒子計數器 | Metone塵埃粒子計數器 |
HACH塵埃粒子計數器 | TSI氣溶膠發生器 | ATI氣溶膠發生器 | Palas氣溶膠發生器 | Topas氣溶膠發生器 | Palas靜電中和器 |
Topas靜電中和器 | Grimm粒徑譜儀 | TSI粒徑譜儀 | Topas粒徑譜儀 | Palas粒徑譜儀 | TSI掃描電遷移率粒徑譜儀 |
HTV 甲醛檢測儀 | HTV-M甲醛檢測儀 | TVOC 檢測儀維修 | Grimm掃描電遷移率粒徑譜儀 | Palas掃描電遷移率粒徑譜儀 | Brechtel掃描電遷移率粒徑譜儀 |
TSI 8530粉塵儀 | TSI 8532粉塵儀 | TSI 8533粉塵儀 | Rad7 氡檢測儀 | TSI 8534粉塵儀 | Thermo PDR-1500粉塵儀 |
ATI 2i光度計 | ATI氣溶膠稀釋器 | 風量罩 | 風速儀 | 空氣品質檢測儀 | EN779測試臺改造 |
Dustmate 粉塵儀 | TSI 8108大顆粒氣溶膠發生器 | TSI 3450單分散氣溶膠發生器 | 車身氣密性檢測設備 | 風管漏風量測試設備 | 凝聚核粒子計數器校準裝置 |
粒子計數器校準裝置 | 更多型號請咨詢客服19mro@19mro.com |
技術文檔下載
- 2016-01-05 10:04Sensirion ASL1600
相關商品