Digi-Sense CPTEMCTPDLX01 溫度控制器

Digi-Sense CPTEMCTPDLX01 溫度控制器

?

功能直接插入式加熱設備

多種控制模式，從簡單的開/關控制到復雜的自整定PID控制

先進的機型包括計算機遠程控制所有的系統操作的免費軟件

程序九斜坡浸泡型材高達16段先進典型

易于使用
純英文菜單，同時顯示兩行顯示測量值和設定point.Temperature的規模選擇讀°C，°F，K（開爾文），和°R（蘭）。非易失性EEPROM存儲器存儲設置和運行參數，保存參數，甚至在功率損耗。前面板的LED顯示輸出和報警條件。傳感器校準功能，糾正錯誤探頭輕松連接控制器有一個方便的輸出插座直接插在電熱水器和其他設備（IEC 230 VAC型號）。所有型號都接受八個類型的熱電偶（先進機型也接受RTD和YSI熱敏電阻探頭）。所在單位在工作臺上或裝入可選面板安裝套件。使用一個250Ω電阻轉換為1至5 V的信號。

Feature direct plug-in of heating devices

Multiple control modes from simple on/off control to sophisticated autotuning PID control

Advanced models include FREE software for remote computer control of all system operations

Program up to nine ramp and soak profiles of up to 16 segments each with the advanced models

Easy to use
Plain English menus with two-line display simultaneously show measured value and set point.Temperature scale is selectable to read in °C, °F, K (Kelvin), and °R (Rankine). Nonvolatile EEPROM memory stores set-up and operating parameters—saves parameters even during power loss. Front-panel LEDs indicate output and alarm conditions. Sensor-calibrate function corrects for probe error.

Easy to connect
Controller has a convenient output receptacle for direct plug-in of heaters and other devices (IEC on 230 VAC models). All models accept eight thermocouple types (advanced models also accept RTDs and YSI thermistor probes). Place unit on a benchtop or mount with optional panel-mount kit.

*Use a 250 Ω resistor to convert to a 1 to 5 V signal.