Techne GT6凝膠時間測定儀 GT-2010600 10轉電機 120V

英國Techne凝膠時間測定儀

Techne Gelation Timers

準確測出聚合物，塑料，密封劑，粘合劑的凝膠時間

Determines gelation time for polymers, plastics, sealants, adhesives

符合BS 5350 B5; BS 3532 k; BS 3815 k; BS 5617; BS 2782-8

Conforms to BS 5350 B5; BS 3532 K; BS 3815 K; BS 5617; BS 2782-8

凝膠產生時自動停止

指示燈顯示凝膠化完成

LED數碼計數器顯示的時間最接近的分鐘或0.1分鐘

易于使用

方便地安裝鐵架

柱塞可拆卸，方便清洗

狹小構造。可在實驗室多裝幾個

取樣量杯及一次性活塞

Stops automatically when gelation occurs

Light shows completion of gelation

Digital LED counter shows time to nearest minute or 0.1 minute

Easy to use

Conveniently mounted from retort stand

Plungers removable for easy cleaning

Narrow construction. Mount several in lab area

Sample cups & disposable plungers available

流變一致性頻率決定了產品的可取為特定的應用。例如，樹脂的表面涂料，涂料制造中的粘合劑。因而實驗室精確的測定凝膠時間是生產配方和工藝條件所必要。

Rheological consistency frequency determines the desirability of a product for a particular application. For example, in resins for surface coatings, in paint manufacture, in adhesives. As a result the accurate laboratory determination of gelation time is necessary for the adjustment of manufacturing formulations or control of processing conditions.

利用Techne膠凝計時器的機械壓縮試驗優于其它方法的，例如，凝膠溶脹試驗，攪拌試驗，SP1凝膠時間，因它可重復的凝膠化時間與物理化學形成膠體液時間一致。該儀器對彈性而非粘性流體的變化十分敏感，因而提供了更一致和可重復的結果。

The mechanical compression test utilized by the Techne Gelation Timer is preferred over other methods, for example, gel swelling test, agitation test, SP1 gel time, because it provides repeatable gelation times consistent with the physical and chemical change in the gelating fluid. The instrument is sensitive to elastic rather than viscous changes in the fluid and as a result provides more consistent and repeatable results

GT-5/6膠凝計時器

GT-5/6 Gelation Timers

型號GT-5/6結合一個可移動的不銹鋼柱塞被測液體垂直往復運動的機械裝置。凝膠發生時產生的彈性材料支持柱塞的重量導致儀器內部的一個開關關閉,時鐘停止,指示燈開啟。型號GT-5讀取到最近的一刻。型號GT-6，精確到0.1分。柱塞的重量保持準確，有效重量作為儀器往復移動機制的一部分，以確保相同儀器或不同儀器之間的結果一致。應用于柱塞的往復運動的小振動來克服摩擦。

Models GT-5/6 incorporate a removable stainless steel plunger which is reciprocated vertically by mechanical means in the liquid under test. When gelation occurs the resulting elasticity of the material supports the weight of the plunger causing a switch inside the instrument to close,the clock to stop and an indicating light to come on. Model GT-5 reads to the nearest minute. Model GT-6 to the nearest 0.1 minute. The weights of the plungers are accurately maintained and the effective weight as part of the reciprocating mechanism in the instrument to ensure consistent and repeatable results with the same instrument and between different instruments. A small vibration is applied to the reciprocating motor of the plunger to overcome friction