嘉實多Brayco 1728潤滑脂 15lbs

說明：

嘉實多Brayco 1728是光滑的，黃色的，半透明NLGI 2號潤滑脂。它是基于一種低分子量全氟聚醚油和四氟乙烯膠凝劑。 Brayco 1728是不可燃的，化學的，對強酸和堿存在化學惰性，并且與氧化劑相容。嘉實多Fluoroclean ? X100和嘉實Fluoroclean ? HE可以用來消除這種潤滑劑。請參閱數據表Fluoroclean ? X100和Fluoroclean ? HE了解有關這些產品的信息。

應用：

Brayco 1728 ，建議在非重要環境或者崗位中應用，這些應用具有腐蝕性化學品和氧化劑直接或間接接觸,潤滑劑相容性是首要關心的問題。 當暴露在濃縮的酸和堿，和氧氣時,Brayco 1728是穩定的。全氟潤滑脂，在一般情況下，由于其固有的化學惰性,表現出優異的儲存期限。

溫度范圍：

-40 ° F至350 °F （ -40 ° C至177 °C ）

局限性：

Brayco 1728是相容的，在與傳統的金屬，塑料，彈性體和正常的工作條件。 Brayco 1728可以通過路易斯酸會受到不利影響，例如在高溫下的氯化鋁。鋁，鎂，鈦或新暴露的摩擦表面可以在一定條件下與Brayco 1728反應。這種系統應徹底評估。表面必須徹底清潔干凈，使用潤滑脂以前，必須要使用有機防銹劑,以保證潤滑。

去除油脂應用于表面多余的油脂：

該產品的組合物是小的PTFE顆粒（這將不會在任何情況下溶解）和全氟聚醚液體的混合物。我們已經發現，如果在從某些地方不再需要或想要去除油脂中的液體成分時候,嘉實多? Fluoroclean ? HE是一種有效的溶劑配制的組合物和助劑。

包裝：

Brayco 1728 15磅和1.75磅包裝。

Description:

Castrol Brayco 1728 is a smooth, buttery, translucent NLGI #2 grease. It is based upon a low molecular weight perfluorinated polyether oil and a tetrafluoroethylene gelling agent. Brayco 1728 is nonflammable, chemically, chemically inert to strong acids and alkalies, and is oxidizer compatible. Castrol Fluoroclean? X100 and Castrol Fluoroclean? HE can be used to remove this lubricant. Refer to the data sheets for Fluoroclean? X100 and Fluoroclean? HE for information regarding these products.

Application:

Brayco 1728 is recommended for those light duty applications in which lubricant compatibility with aggressive chemicals and oxidants in direct or indirect contact is of primary concern. Brayco 1728 is stable when exposed to both concentrated acids and bases, and oxygen. Perfluorinated greases, in general, exhibit excellent shelf lives due to their intrinsic inertness.

Temperature Range:

-40°F to 350°F (-40°C to 177°C)

Limitations:

Brayco 1728 is compatible, under normal operating conditions with conventional metals, plastics, and elastomers. Brayco 1728 may be adversely affected by Lewis Acids such as aluminum chloride, at elevated temperatures. Newly exposed rubbing surfaces of aluminum, magnesium, or titanium may react with Brayco 1728 under certain conditions. Such systems should be thoroughly evaluated. Surfaces must be well cleaned of organic rust inhibitors prior to grease application to insure lubrication.

Removal of unwanted grease from grease applied surfaces:

The composition of this product is a mixture of small PTFE particles (which won't dissolve in anything) and a perfluorinated polyether liquid. We have found that Castrol? Fluoroclean? HE is an effective solvent for the liquid component of the formulated composition and aids in the removal of the grease from places where it is no longer needed or wanted.

Packaging:

Brayco 1728 is available 15 pound pails and 1.75 lb cartridges.