除了具有Welas 的產品特點以外,還具有以下特點:
● 觸摸屏式顯示和操作,集成網絡服務器,實時顯示測量數據
● 顆粒粒徑范圍:0.2-105μm
● 顆粒濃度范圍寬:1p/cm3-106p/cm3
● 使用環境:溫度:-90℃≤ T ≤ 70℃,可選高溫到250℃ 壓力:P ≤ 10bar
● 無需外接電腦,單臺儀器可以連續自動測量數周
● 儀器配置標準接口,過程控制系統或通用Labview 程序可以控制該儀器,所以特別適用于控制和監測
Description
The Promo? is a light-scattering aerosol spectrometer system for particle size analysis and concentration determination that can be equipped with all welas? sensors.
On Promo? 3000, the welas? sensors equipped with different measurement volumes, as required, can be easily connected via fiber optic cables and interchanged as required. These sensors allow reliable measurement in the concentration range from < 1 particle/cm3 up to 106 particles/cm3 and are available for measurement in gases, as well as in liquids. Please observe the "welas? sensors" product data sheet.
Unique are up to four measuring ranges in only one device:
0.2 μm – 10 μm
0.3 μm – 17 μm
0.6 μm – 40 μm
2 μm – 100 μm (additionally for sensors 2300 and 2500).
Promo? 3000 is famous for up to 128 size channels per measuring range and a concentration range from < 1 particle/cm3 to 106 particles/cm3.
A touch display ensures user-friendly operation. Measurements can be started easily, and all data, such as the current number distribution and the number concentration, as well as 24 further statistical values, can be evaluated and displayed in real time.
With Promo? as a standalone measuring device (i.e. without external computer) measurements are performed continuously. All incoming data can be stored with a maximum temporal resolution of 1 s. Promo? can therefore measure and save data over weeks independently. For data transfer, Promo? can also be integrated into a company network.
The Promo? has a standard interface and can be controlled by a process control system or by a simple Labview program.
For this reason, Promo? is especially well suited for control and monitoring applications.
Palas? offers remote maintenance for the device and data access via www.palas.de/user.
The quality in detail:
On Promo? 3000, two welas? sensors are supplied with one light source and the scattered light pulses are detected by a photomultiplier. This enables a quasi-simultaneous particle measurement at two sampling locations that are up to 100 meters apart.
With Promo? 3000 the user effectively has two scattered-light spectrometers in one device with the same device characteristics with regard to:
Particle size resolution capability
Particle size classification accuracy
Counting efficiency
Zero counting rate
The various welas? sensors are characterized by a particularly good conformity of counting efficiency and particle size resolution (see product data sheet: welas? sensors").
All welas? 2000 series sensors can be used with the Promo? 3000. The quasi-simultaneous particle size and particle quantitative determination offers particular advantages for characterising separators with fluctuating raw gas concentrations.
Opto-mechanical switching
Benefits
Measuring range of 0.2 to 100 μm (4 measuring ranges selectable in one device)
Up to four measuring ranges in only one device:
0,2 μm – 10 μm
0,3 μm – 17 μm
0,6 μm – 40 μm
2 μm – 100 μm (additionally for sensors 2300 and 2500)
Up to 128 size channels per measuring range
Concentration range of 1 particle/cm3 to 106 particles/cm3
Calibration curves for different refractive indices
Very high and reproducible counting efficiency rate starting at 0.2 μm
Optical fibre technology
Simple operation with a large touch display
Calibration, cleaning and lamp replacement can all be performed independently by the customer
External control by RS 232 or Ethernet
With analysis software PDAnalyze
Optional: Software PDControl for operation as welas? digital available
Low maintenance
Reliable function
Reduces your operating expenses
Datasheet
Measuring range of 0.2 to 100 μm (4 measuring ranges selectable in one device)
Up to four measuring ranges in only one device:
0,2 μm – 10 μm
0,3 μm – 17 μm
0,6 μm – 40 μm
2 μm – 100 μm (additionally for sensors 2300 and 2500)
Up to 128 size channels per measuring range
Concentration range of 1 particle/cm3 to 106 particles/cm3
Calibration curves for different refractive indices
Very high and reproducible counting efficiency rate starting at 0.2 μm
Optical fibre technology
Simple operation with a large touch display
Calibration, cleaning and lamp replacement can all be performed independently by the customer
External control by RS 232 or Ethernet
With analysis software PDAnalyze
Optional: Software PDControl for operation as welas? digital available
Low maintenance
Reliable function
Reduces your operating expenses
Applications
Emission monitoring of installations
Control of grinding and classification processes
Monitoring of production processes in the food, pharmaceuticals and chemicals industries
Testing of complete filters, inertial and wet separators or electrostatic precipitators
Using opto-mechanical switching, the two sensors that are connected can be easily controlled. The sensors are controlled automatically with the software.
The particular advantage over a manual measurement selector switch:
Faster change of the measurement location
No deposits in sampling lines
Long service life; no wear of the seals due to dust particles
The Promo? measurement technology:
The Promo? has a new, fast 20 MHz signal processing processor, which analyses the interference of each particle. This makes it possible to recognise coincidental events on the basis of the scattered light signal, i.e. more than one particle in the measurement volume at one time can be identified from the individual signal and corrected (according to Dr. Umhauer / Prof. Dr. Sachweh).
This makes it possible to increase the maximum concentration limit up to 106 p/cm3 (welas? 2070 sensor). Also in low concentrations < 1 particle/cm3 with the welas? 2500 sensor, this leads to a higher measuring accuracy.
High classification accuracy and high particle size resolution (see Graph 1) are guaranteed by the following special features:
White light and 90° light-scattering detection
→ Unambiguous calibration curve
Patented T-aperture
→ No border zone error
New digital individual signal processing
→ Coincidence detection and correction of the individual signal making it possible to measure higher concentrations.
Graph 1: Example with 2200 sensor
The Promo? aerosol spectrometer is characterized by its very high counting efficiency starting from 0.2 μm!
→ No border zone error
Graph 2: Example with 2200 sensor, in relation to LAS-X II
New digital individual signal processing
→ Coincidence detection and correction of the individual signal making it possible to measure higher concentrations.
Graph 1: Example with 2200 sensor
The Promo? aerosol spectrometer is characterized by its very high counting efficiency starting from 0.2 μm!
|
|
|
| ||||||||||||||||||||||||
|
|
|
| ||||||||||||||||||||||||
|
|
|
| ||||||||||||||||||||||||
|
|
|
| ||||||||||||||||||||||||
|
購買咨詢
(已有0條咨詢)商品評論
(已有0條評論)購買流程
1.購買產品:點擊“立即購買”→填寫產品數量、聯系方式并提交→會員顧問訂單處理→合同簽訂。
2.咨詢產品:請聯系會員顧問或致電會員客服電話。
3.如果您還不是我們的會員,請先注冊。
4.最小起訂數量:1 ,進口產品貨期,請跟產品擔當聯系!
品牌擔當:
投訴電話:17717909117
聯系方式: 電話:021-52069907 分機 或撥0轉總機,傳真:010-52060857
維修流程
- 1、技術溝通,初步判斷問題電話,與客戶進行初步溝通、了解并初步判斷儀器所出現的故障問題。
- 2、簽訂維修協議由我公司向客戶發送儀器維修協議,客戶需如實填寫內容并回傳以便我司對儀器做進一步判斷。
- 3、客戶郵寄儀器客戶可按照我司地址郵寄儀器,并將快遞單拍照發送至您的專屬客服進行備案。
- 4、詳細診斷機器故障我司收到郵寄儀器后會對郵寄的儀器進行拍照并開箱檢驗,對儀器做進一步故障判斷。
- 5、支付維修費用如客戶儀器在保修期內,我司不收取任何維修費,如客戶儀器在保修期外,我司會適當收取維修費。
- 6、郵寄儀器給客戶我司將維修好的儀器按客戶地址進行拍照并郵寄,自此雖維修協議終止,但我司將提供終身免費答疑及技術指導。
Testo 340 煙氣分析儀 | Testo350 煙氣分析儀 | PMS塵埃粒子計數器 | TSI塵埃粒子計數器 | Lighthouse塵埃粒子計數器 | Metone塵埃粒子計數器 |
HACH塵埃粒子計數器 | TSI氣溶膠發生器 | ATI氣溶膠發生器 | Palas氣溶膠發生器 | Topas氣溶膠發生器 | Palas靜電中和器 |
Topas靜電中和器 | Grimm粒徑譜儀 | TSI粒徑譜儀 | Topas粒徑譜儀 | Palas粒徑譜儀 | TSI掃描電遷移率粒徑譜儀 |
HTV 甲醛檢測儀 | HTV-M甲醛檢測儀 | TVOC 檢測儀維修 | Grimm掃描電遷移率粒徑譜儀 | Palas掃描電遷移率粒徑譜儀 | Brechtel掃描電遷移率粒徑譜儀 |
TSI 8530粉塵儀 | TSI 8532粉塵儀 | TSI 8533粉塵儀 | Rad7 氡檢測儀 | TSI 8534粉塵儀 | Thermo PDR-1500粉塵儀 |
ATI 2i光度計 | ATI氣溶膠稀釋器 | 風量罩 | 風速儀 | 空氣品質檢測儀 | EN779測試臺改造 |
Dustmate 粉塵儀 | TSI 8108大顆粒氣溶膠發生器 | TSI 3450單分散氣溶膠發生器 | 車身氣密性檢測設備 | 風管漏風量測試設備 | 凝聚核粒子計數器校準裝置 |
粒子計數器校準裝置 | 更多型號請咨詢客服19mro@19mro.com |
技術文檔下載
- 2019-02-28 20:04Eurovent 4/21-2018,一般通風過濾器能效估算
- 2018-12-21 19:26Palas Promo 2000氣溶膠粒徑譜儀原版手冊
- 2018-03-14 13:24GBT 14295-2008 空氣過濾器
- 2017-12-29 15:27Topas ATM-243氣溶膠發生器原版資料
- 2017-12-23 16:39檢測用凝聚式氣溶膠發生器的高壓改造_吳憲,石巖
- 2017-12-21 17:26檢測用凝聚式氣溶膠發生器的高壓改造_吳 憲,石 巖
- 2017-12-21 16:19一種納米氣溶膠發生系統的設計及性能測試_麥華俊,蔣靖坤,何正旭,郝吉明
- 2017-12-04 12:31Grimm 11-A 1.109粒徑譜儀安裝使用中文說明書
- 2017-11-11 15:45APS_SMPS_WPS對南京夏季氣溶膠數濃度的對比觀測_王飛
- 2017-11-11 15:24SMPS_3936氣溶膠粒徑譜儀測試原理及其性能評定_劉志軍
- 2017-09-18 18:20新型流化床氣溶膠發生裝置及其特性_李永旺,趙長遂,吳新,韓松,魯端峰,沈湘林
- 2017-07-07 17:07Palas Promo 2000,3000氣溶膠粒徑譜儀原版資料
- 2016-05-27 14:21Palas HMT1000油霧分離器產品ppt
- 2015-09-04 17:16AGMASOL PS40原版資料
- 2015-08-03 08:58德國Topas Lap-322粒徑譜儀操作手冊
相關商品